Uniden DCT7585 manual Customizing Your Phone, Deleting Base Speed Dial Numbers, Press menu/clear

press [redial/pause] to insert a two-second pause. You can also use more than one pause together if two seconds is not long enough. Each pause counts as one digit.

3.Press [memory] again, and then press the number key ([0] to [9]) where you want to store this phone number. You will hear a confirmation tone.

Deleting Base Speed Dial Numbers

1.With the phone in standby, press [memory] twice.

2.Press the number key ([0] to [9]) that contains the phone number you want to delete. You will hear a confirmation tone.

Customizing Your Phone

Changing the Handset Banner

Each handset will display a banner name once it is registered to the base. The default banner is Handset #1, Handset #2, etc. You can change the name your phone displays by changing the banner display. If you have more than one handset, the banner name identifies your handset during handset-to-handset functions like intercom and DirectLink™ communication. The name will be displayed on the LCD screen during Standby, Intercom, Intercom Hold, Room/Baby Monitor, and Copy Phonebook operations. The banner name will be displayed on the receiving handset as well.

1.Press [menu/clear].

2.Select the HANDSET SETUP menu, and then the BANNER submenu.

3.Use the keypad to enter or edit the banner name. (See Entering Text from Your Handset on page 12 for detailed instructions on entering text.)

4. Press [select/ ] . You will hear a confirmation tone.

27