Uniden DCT7585, DCT7085 manual Setting the Day & Time, Press menu/clock, Select or

Setting the Day & Time

If you do not set the clock on your answering system, your messages may not have the correct time and day stamp. You can set the day and time from the handset or the base.

From the base				From the handset
1.	Press [menu/clock].			1.	Press [menu/clear].
2.	Press [	/select] or [	/select] until the correct day is announced	2.	Move the cursor to GLOBAL
	and the message counter shows the corresponding number (1 for				SETUP and press [select/ ] .
	Sunday, 2 for Monday, etc.).			3.	Move the cursor to DAY & TIME
3.	Press [set] to select the day.
					and press [select/ ] .
4.	Press [	/select] or [	/select] until you hear the correct hour	4.	Use [	] and [	] to select
	setting. The numbers 1 through 12 appear on the base as each				the correct day, and press
	hour is announced.				[select/	] .
5.	Press [set] to select the hour.			5.	Use [	] and [	] to select
6.	Press [	/select] or [	/select] until you hear the correct minute		the correct hour, and press
					[select/	] .
	setting. The numbers 00 through 59 appears on the base as each			6.	Use [	] and [	] to select
	minute is announced.
7.	Press [set] to select the minute.				the correct number of minutes,
					and press [select/		] .
8.	Press [	/select] or [	/select] until you hear the correct AM or	7.	Use [	] and [	] to select
	PM setting. The message counter displays A or P.				AM or PM, and press
9.	Press [set] to select the AM/PM setting. A confirmation tone				[select/	] . You hear a
					confirmation tone.
	sounds, and the day and time are announced for your review.

47