Traveling Out of Range
During a call, if you move your handset too far from your base, noise may increase. If you pass the range limit of the base, the handset will beep, display OUT OF RANGE, and then go to standby. The base will maintain the connection for 30 seconds after the handset goes out of range. If you move the handset back within range of the base within 30 seconds, press [ / flash] or [
] to pick up the call again.
Common Issues
If your phone is not performing to your expectations, please try these simple steps first. If these steps do not solve your problem, please call our Customer Hotline (see back cover page).
Symptom | Suggestion | |
The charge LED won't | • Make sure the AC adapter is plugged into the base or the charger (if you | |
have more than one handset) and wall outlet. | ||
illuminate when the handset is | ||
• Make sure the handset is properly seated in the cradle. | ||
placed in the cradle. | ||
• Make sure the charging contacts on the handset are clean. | ||
| ||
| • Move the handset and/or base away from metal objects or appliances and try | |
The audio sounds weak. | again. | |
| • Make sure that you are not too far from the base. | |
| • Make sure that you are not too far from the base. | |
| • Make sure the line is not in use. If an outside call is already using a line, you | |
| cannot use that line to make another outside call. | |
Can't make or receive calls. | • Check both ends of the base telephone line cord. | |
• Make sure the AC adapter is plugged into the base and wall outlet. | ||
| ||
| • Disconnect the AC adapter and reconnect. | |
| • Change the Digital Security Code (see Changing the Digital Security Code | |
| on page 60). | |
| 61 |