Uniden DECT1915+1 manual Using a multi-handset system, Display a list of handset numbers

Using a multi-handset system

If you have a DECT 1915/1915+1 multi-handset system, you can register additional handsets — altogether, up to six handsets per base unit. With two or more handsets registered, you can:

■make intercom calls from one handset to another

■transfer an outside call from one handset to another

■shuttle between an outside call and an intercom call

■set up a three-way conference call

Each handset’s number ( 1 to 6) is shown on its display.

!line at once. If you try to make a call while another

handset is already using the line, you’ll hear rapid ‘beeps’ and the display will show Line busy.Only one handset can be connected to the outside

To make an	1
intercom call
in this example,	2
handset 1 is

calling handset 2)

3

To end an	◗
intercom call

Press and hold the INT ✱ button for 1 second

uThe display a list of handset numbers

Key in a handset number

uThe display shows Handset 1 calls Handset 2. Handset 2 rings with Intercom melody and its display shows Internal call! and the name and number of the calling handset.

Press any button (except HANG UP) on the ringing handset to answer the call

Press the HANG UP button;

or simply replace the handset on the base unit or charger pod

uThe other handset beeps rapidly. The user can press the HANG UP button or simply wait a moment for the display to return to standby mode.

25