Uniden DECT1915+1 manual Read these notes first

Page 6

Read these notes first

Choosing a site for the base unit and charger pod

The base unit and charger pod(s) should be placed on a level surface, in a position where:

the mains adapter plug will reach an easily accessible 240-V AC switched mains supply socket — never try to lengthen the mains power cable

the base unit’s telephone line cable will reach your telephone line socket or extension socket (the charger pod does not have a telephone line connection)

it is not close to another telephone — this can cause radio interference

it is not close to a sink, bath or shower, or anywhere else where it might get wet

it is not close to other electrical equipment — fridges, washing machines, microwave ovens, fluorescent lights, TVs etc.

!please note that only one SMS phone connected to the line can receive messages. So you shouldn’t

connect another SMS-compatible phone to the same line as your DECT 1915/1915+1.If you’re using the SMS text messaging facility,

Radio signals

To use your handset and base unit together, you must

between

be able to establish a radio link between them. Be

handset and

aware that:

base unit

Any large metal object — like a refrigerator, a mirror

 

or a filing cabinet — between the handset and the

 

base unit may block the radio signal.

 

Other solid structures, like walls, may reduce the

 

signal strength.

 

 

 

 

 

Mains power

IMPORTANT — The DECT 1915/1915+1 base unit and

connection

charger pod must be used with the mains adapter

 

supplied with the unit. Using any other adapter will

 

invalidate any approval given to this apparatus.

3

Image 6
Contents DECT1915/1915+1 Important note emergency calls If you need help …Unpacking your DECT1915/1915+1 system Arrow buttons Left and right Soft Buttons Press the button to switch the handset onDisplay Headset socketContents Contents Connection and conditions for useRead these notes first Installation and set-up If you have one or more charger pods … Connection to the telephone line Electrical SafetyBefore you start Move to a different position to clear the interferenceExploring the display Shortcut buttons To lock the keypadPress the Hang UP button and hold it for about 2 seconds Volumes Switching on and offTo switch Handset on Off Press the Hang UP button and hold it for 4 secondsYour handset’s name Key in the date as a six-digit number then select OK Idle mode Press the right Soft button to selectTime and date Display shows Time and the current timePress the Phone button Making and answering callsTo make a Call Key in the telephone number Don’t want to Soft button to select Silent AnswerOn the other end can’t hear you Volume Press the or buttonYou can mute the microphone so the person To mute and un-mute the microphoneLast Number Redial … and options Redial list Press the left Soft button RedialDisplay shows a list of up to 10 numbers If you’ve selected Delete entry, you’ll be Cancel without deleting the entryBack to cancel Press the right Soft button OK to deletePress the right Soft button twice Menu V OK Phone Book memory diallingTo open Phone Book To store a Number Press the right Soft button OKUse the or button to go to H M or O Key in the phone numbers, using the numbered buttonsClear to clear characters from the display Use the or button to go toPress the short-cut button Idle modeDisplay shows Display shows a list of namesDisplay shows the Phone Book entry Display goes back to the Phone Book options menuTo to idle mode Or the left Soft button Back to cancelTo idle mode To delete aCaller Display Press the button Press the or button to scroll between new recordsIf you select Delete entry, you’ll be asked If you select Delete all, you’ll be askedDisplay shows the new Phone Book entry Display a list of handset numbers Using a multi-handset systemLine at once. If you try to make a call while another Key in a handset numberPress the Hang UP button to hang up To transfer aWait for the other user to answer Transfer the callPress the right Soft button Conf Press the Handset Locator button on the base unitHandset registration Base unit Without a tick To de-register To registerTo an extra Press the right Soft button Menu, thenBase unit manually With which it can best set up a radio linkTo select a You don’t need this function if you haveHandset registration Service SMS text messaging read this firstSMS It’s important to leave these numbers as they are. If 01983391All messages They’ve been accidentally changed, you’ll need toSMS text messaging Display shows Enter MessageWrite your message Display shows Send Display shows Send MessageDisplay shows Enter Tel No For a few momentsDisplayed above the left Soft button To read yourMessages Or press the left Soft button SMS to go… or to delete Messages from the Inbox Display shows the number of the person who sent the message Press the right Soft button OK to send the messageYou’ll be asked Are you sure? Change Scroll to Settings and press the right SoftTo check or Button OK to select itQuick reference guide to the menus SeeTo change the way the handset is configured To set a PIN code for the handset. By default, To set the handset so that a given number is autoIncoming call by simply lifting the handset. If you To bar outgoing calls to phone Not just your individual handsetTo bar prevent certain types Numbers starting with specifiedFirst number has been preset to 000 for To change the length of the Flash Set Default To return all system settings to their defaults To use your handset as a stopwatch timerTo view a calendar Troubleshooting Engineers. Never attempt any repairs or adjustmentsEveryday use Out of range. Now I can’t use my handset Ference Display featureThere is inter Noise onSend Using a multi-handset systemSMS text messaging TerminalBatteries PBX use If the fault persists … Cleaning and care Technical details Index Last Number Redial, 15 on a PBX Locking the keypadIndex Warranty Buttons to press for text characters Y z Y Z