Uniden EXI3965 manual Setting up the Phone, Do the following steps, Choose the best location

Page 8

Setting up the Phone

Do the following steps:

A. Choose the best location B. Install the battery pack

C. Connect the base unit D. Choose the dialing mode

A. Choose the best location

Before choosing a location for your new phone, read the INSTALLATION CONSIDERATIONS included in the PRECAUTIONS AND IMPORTANT SAFETY INSTRUCTIONS brochure. Here are some important guidelines you should consider:

Avoid heat sources, such as radiators, air ducts, and sunlight

Avoid television sets and other electronic equipment

Choose a central location

Avoid noise sources such as a window by a street with heavy traffic

Avoid microwave ovens

Avoid excessive moisture, extremely low temperatures,

dust, mechanical vibration, or shock

Avoid personal computers

Avoid other cordless telephones

•The location should be close to both a phone jack and a continuous power outlet that is not switchable.

•Keep the base and handset away from sources of electrical noise such as motors, microwave ovens, and fluorescent lighting.

•Be sure there is sufficient space to raise the base antenna to a vertical position.

•The base can be placed on a flat surface such as desk, tabletop, or mounted on a standard wall plate.

[ 6 ] G E T T I N G S TA R T E D

Image 8

Contents Page Page Contents Features TerminologyControls and Functions FlashO N T R O L S a N D F U N C T I O N S Checking the Package Contents Choose the best location Setting up the PhoneDo the following steps Low battery alert Install the battery packBattery use time per charge Connect the base unit Press and hold flash until you hear a confirmation tone Choose the dialing modeBase Setting only Setting the handset retainer clip for wall mounting Standard wall plate mountingDirect wall mounting Setting Caller ID Options Or Cidcw Off depending upon the type of service to which When the phone is in the standby mode, press menuUse To move the pointer between Auto Talk On or You subscribe PressRinger Volume Setup Handset Ringer Tone SettingHandset ringer volume setting Base ringer volume settingDistinctive Ringer Setup Then press ª to move the pointer toUse To select Distinctive On or Press int’cm/select and a confirmation tone will soundInt’cm/select to select. The Language setting Selecting a LanguageTo move the pointer to Language Screen appearsHandset Off the Base Making and Receiving CallsFrom the Handset From the Base Handset On the Base Call Waiting Adjusting Earpiece Volume Base VolumeRedialing a Call Redialing from Standby ModeRedial from Talk Mode To call the last number dialed from the base Press talk key Traveling Out-of-RangeFrom the Base With the handset Press , ª to move pointer to memory location of your choiceTo select location Store Name appears on the display. Then use the numberE M O R Y D I a L I N G With the Base Memory dialing from Standby ModeMaking Calls with Memory Dialing Press talk . Talk Memory dialing from Talk ModeDisplay a Programmed Number while in Memory Location List Location. Then press to select location to be edited To selectPress , ª to scroll through memory locations Press to move the pointer to Yes Editing a stored Name, Phone Number or Distinctive RingDeleting the Stored Data With the Base When speaking on the handset When speaking on the baseWay Conferencing Press On the base unit To initiate the 3-way conversationIntercom/page Feature Intercom from the base to handsetIntercom from the handset to base Base. The handset beeps. If no answer, pressCall Transfer Feature Chain DialingTo Transfer from the Handset to the Base To Transfer from the Base to the HandsetSelecting a Different Channel Tone Dialing Switch-overMute Handset/Base Caller ID When the Telephone RingsYou must subscribe to Caller ID service to use this feature Press caller id to return to standby When you answer the call, the display changes to TalkViewing the Caller ID Message List When the pointer is at Yes When the pointer is at NoDeleting Information from the Caller ID List Deleting a Caller ID messageUsing the Caller ID List Deleting all Caller ID names/numbersCalling a party from the Caller ID list Tone sounds and all stored Caller ID messages are deletedLong Distance calls and Area Code setting/cancellation Storing Caller ID messages in Memory dialingCurrent telephone call, the phone number Using Caller ID on Call Waiting ServiceWhen a new incoming call arrives during your Call Waiting Deluxe Features For exampleChanging the Digital Security Code Remove the handset from the base unitPress and hold int’cm/page on the base While the handset is emitting the pagingTo remove the Face plate To attach the Face plate Headset InstallationChanging the Face Plate Installing the Beltclip MaintenanceBattery replacement and handling Power FailureTroubleshooting SymptomAC Adapter Information Battery InformationGeneral Information Precautions Installation Considerations Index K, LMemo At Uniden, we’ll take care of you