Uniden EXI3965 Setting the handset retainer clip for wall mounting, Standard wall plate mounting

Page 12

Raise the antenna.

Mounting the Base Unit on a Wall

Setting the handset retainer clip for wall mounting

!

DO NOT use an outlet controlled by a

wall switch.

1 On the base unit, pull the handset retainer clip out of the slot and rotate it clockwise 180 degrees.

2 Flip the retainer clip from front to back. Slide it back into the slot so that the lip of the retainer is up and the ª is down. The retainer holds the handset

in place.

Standard wall plate mounting

Flip the hook tab over so the tab holds the handset.

This phone can be mounted on any standard wall plate.

1 Route the AC adapter cord inside the molded wiring channel as shown.

2 Plug the telephone line cord into the TEL LINE jack. Route the cord inside the molded wiring channel as shown.

3 Raise the antenna to a vertical position.

Single-Line Telephone Jack (RJ11C)

Telephone

Line Cord

Power Outlet (AC 120V, 60Hz)

AC Adapter

4 Align the mounting slots on the base with the mounting posts on the wall. Then push in and down until the phone is firmly seated.

[ 10 ] G E T T I N G S TA R T E D

Image 12

Contents Page Page Contents Features TerminologyControls and Functions FlashO N T R O L S a N D F U N C T I O N S Checking the Package Contents Setting up the Phone Do the following stepsChoose the best location Install the battery pack Battery use time per chargeLow battery alert Connect the base unit Choose the dialing mode Base Setting onlyPress and hold flash until you hear a confirmation tone Setting the handset retainer clip for wall mounting Standard wall plate mountingDirect wall mounting Setting Caller ID Options Or Cidcw Off depending upon the type of service to which When the phone is in the standby mode, press menuUse To move the pointer between Auto Talk On or You subscribe PressRinger Volume Setup Handset Ringer Tone SettingHandset ringer volume setting Base ringer volume settingDistinctive Ringer Setup Then press ª to move the pointer toUse To select Distinctive On or Press int’cm/select and a confirmation tone will soundInt’cm/select to select. The Language setting Selecting a LanguageTo move the pointer to Language Screen appearsMaking and Receiving Calls From the Handset From the Base Handset On the BaseHandset Off the Base Call Waiting Adjusting Earpiece Volume Base VolumeRedialing from Standby Mode Redial from Talk ModeRedialing a Call Traveling Out-of-Range From the BaseTo call the last number dialed from the base Press talk key With the handset Press , ª to move pointer to memory location of your choiceTo select location Store Name appears on the display. Then use the numberE M O R Y D I a L I N G Memory dialing from Standby Mode Making Calls with Memory DialingWith the Base Memory dialing from Talk Mode Display a Programmed Number while in Memory Location ListPress talk . Talk To select Press , ª to scroll through memory locationsLocation. Then press to select location to be edited Editing a stored Name, Phone Number or Distinctive Ring Deleting the Stored DataPress to move the pointer to Yes With the Base When speaking on the handset When speaking on the baseWay Conferencing Press On the base unit To initiate the 3-way conversationIntercom/page Feature Intercom from the base to handsetIntercom from the handset to base Base. The handset beeps. If no answer, pressCall Transfer Feature Chain DialingTo Transfer from the Handset to the Base To Transfer from the Base to the HandsetTone Dialing Switch-over Mute Handset/BaseSelecting a Different Channel When the Telephone Rings You must subscribe to Caller ID service to use this featureCaller ID When you answer the call, the display changes to Talk Viewing the Caller ID Message ListPress caller id to return to standby When the pointer is at Yes When the pointer is at NoDeleting Information from the Caller ID List Deleting a Caller ID messageUsing the Caller ID List Deleting all Caller ID names/numbersCalling a party from the Caller ID list Tone sounds and all stored Caller ID messages are deletedLong Distance calls and Area Code setting/cancellation Storing Caller ID messages in Memory dialingUsing Caller ID on Call Waiting Service When a new incoming call arrives during yourCurrent telephone call, the phone number Call Waiting Deluxe Features For exampleChanging the Digital Security Code Remove the handset from the base unitPress and hold int’cm/page on the base While the handset is emitting the pagingHeadset Installation Changing the Face PlateTo remove the Face plate To attach the Face plate Installing the Beltclip MaintenanceBattery replacement and handling Power FailureTroubleshooting SymptomBattery Information General InformationAC Adapter Information Precautions Installation Considerations Index K, LMemo At Uniden, we’ll take care of you