Uniden EXI916 manual Direct Wall Mounting

Page 18

Direct Wall Mounting

If you do not have a standard wall plate, you can mount your phone directly on a wall. Before mounting your phone, consider the following:

➧Select a location away from electrical cables, pipes, or other items behind the mounting location that could cause a hazard when inserting screws into the wall.

➧Make sure the wall material is capable of supporting the weight of the Base Unit and Handset.

➧Use the supplied screws with anchoring devices suitable for the wall material where the Base Unit will be placed.

1.Insert two mounting screws 3-15/16 inches apart. Allow about 3/16 of an inch between the wall and screw heads for mounting the phone.

2.Attach the Wall Mount Adapter (see page 11, steps 1 and 2).

3.Plug one end of the long telephone cord into the TEL LINE jack on the Base Unit.

3/16 IN.

3 15/16 IN.

14

Image 18

Contents EXI Controls and Functions Precautions Controls and Functions Contents Important Safety Instructions Battery Safety Precautions Features IntroductionIncluded with the EXI 916/917 Telephone Line Problems Important Electrical ConsiderationsRange Radio Interference More Than One Cordless TelephonePrivacy Selecting a Location InstallationConnecting the Telephone Cords Telephone Line OutletsApplying Power to the Base Unit Desk or Tabletop InstallationUse only the Uniden AC Adapter supplied with this phone Wall Installation Standard Wall Plate MountingPage Adapter Direct Wall Mounting Page Adapter Setting the Handset Retainer Page Setting Up Your Phone Installing the Handset Battery PackPositioning the Antenna Charging the Battery Pack Initial Battery ChargingLow Battery Indicator Total CallsBattery Memory Effect Cleaning the Battery ContactsSetting the Pulse/Tone Switch Volume High Volume LOW Adjusting Ringer ControlsAutomatic Digital Code Security Entering the Local Area Code To enter your local area codeTo delete your local area code Setting Caller ID on Call Waiting To turn Caller ID on Call Waiting onTo turn Caller ID on Call Waiting off Setting the AutoTalk Feature Using Your Phone Making CallsReceiving Calls Uknown NUM Answering a Call with AutoTalk Enabled Answering a Call without AutoTalk EnabledRedialing the Last Number Called Using the Flash Key with Call Waiting Viewing Calls in Memory Using Caller IDCaller ID Display LCD with Handset on Base UnitCalling the Displayed Number Deleting Caller ID MessagesProgramming Your Phone Storing a Caller ID number in Dial MemoryStoring Other Phone Numbers in Dial Memory Phone NO.? Calling a Number Stored in Memory Editing and Deleting Numbers in Dial MemoryTob Jones Tom Jones Troubleshooting Problem SuggestionProblem Suggestion Specifications General The EXI 916/917 complies with FCC Parts 15One-Year Limited Warranty Covered under one or more of the following U.S. patents