Setting Caller ID on Call Waiting
✻You must subscribe to Caller ID on call waiting from your local phone service to use this feature.
You can set your EXI 916/917 phone to display information about calls that generate a call waiting tone while you are on a call.
✻With this feature set you will not be able to hear the person you are talking to for 2.4 seconds after you receive the call waiting tone.
To turn Caller ID on Call Waiting on:
1.Remove the Handset from the Base Unit.
2.Press function three times.
CIDCW OFF
3.Press 1.
4.Press mem. A confirmation tone sounds and the display remains on for two seconds.
CIDCW ON ON-1 OFF-0
CIDCW ON ON-1 OFF-0
5.Place the Handset on the Base Unit. The Charge LED on the Base Unit will blink to indicate that the setting has been stored.
To turn Caller ID on Call Waiting off:
1.Remove the Handset from the Base Unit.
2.Press function three times
3.Press 0.
4.Press mem. A confirmation tone sounds and the display remains on for two seconds.
CIDCW ON
CIDCW OFF
CIDCW OFF
5.Place the Handset on the Base Unit. The Charge LED on the Base Unit will blink to indicate that the setting has been stored.
26