Using Caller ID
The Caller ID Display
The LCD displays information about the current call and previous calls received on your EXI 916/917 cordless phone, including the total calls received and the number of new calls received.
The LCD display backlight is always active while the Handset is on the Base Unit. When the Handset is removed from the Base Unit, the LCD display backlight turns off immediately. To reactivate the LCD backlight, you need to press the caller id key.
LCD with Handset on Base Unit
✻The in use LED blinks, indicating you have new Caller ID messages.
TOTAL CALLS 10
NO NEW CALLS
NEW TOTAL
02 10
WITH NEW CALLS
LCD with Handset off Base Unit and caller id pressed.
TOTAL CALLS 10
NO NEW CALLS
NEW TOTAL
02 10
WITH NEW CALLS
✻The EXI 916/917 can store information on up to 30 different calls. Information on new calls received after 30 calls will be stored, and the oldest call in memory will be deleted.
Viewing Calls in Memory
✻If you do not press a key within 2 seconds, the Handset beeps and the phone returns to standby.
1.Remove the Handset from the Base Unit.
2.Press caller id.
3.To view calls stored in memory, press the ▼ or ▲ keys.
TOTAL CALLS 10
KATHLEEN ROL
✻If the number is longer than 12 digits, the display will scroll to the left until the last number is shown in the display.
32