Uniden EXL 8945 manual Mounting the base unit on a wall, Standard wall plate mounting

Page 11

Mounting the base unit on a wall

Standard wall plate mounting

This phone can be mounted on any standard telephone wall plate.

1

2 - 7

4

Wall plate

7

3

7

5

AC outlet

1	Snap the wall mount
	adapter into the
	notches on the base.
2	Plug the telephone
	line cord to the
	TEL LINE jack and the
	AC adapter to the
	DC IN 9V jack.
3	Plug the telephone
	line cord into the
	telephone outlet.
4	Wrap the AC adapter
6	cord inside the
2	molded wiring
2	channel. Then wrap
	the cord around the
	strain relief notch.
5	Plug the AC adapter
	into a standard
	120V AC wall outlet.
6	Raise the antenna to a
	vertical position.
7	Align the mounting
	slots on the base with
	the mounting posts on
AC adapter	the wall. Push in and
	down until the phone

is firmly seated.

8

Image 11

Contents Page Introduction FeaturesLong Dst Controls and functions40 41 42 Contents Handset Read this firstBase unit Checking the package contents Choose the best location Setting up the base unitConnect the base unit If you want to install the base unit on the wall, seeIf you arent sure of your dialing system Choose the dialing modeIf your dialing system is Set the switch to Tone PulseStandard wall plate mounting Mounting the base unit on a wallDirect wall plate mounting Status LED Preparing the battery packDo not use any liquids or solvents Battery use time per chargeWhen the battery charge becomes low Cleaning the battery contactsOther Operations Making a callFrom the handset From the baseLDM call from the base Using the Long Distance Manager LDMPlacing a call using LDM LDM call from the handsetDo not USE LongDst Button to Dial Private Branch Exchange PBX dialingFrom the handset Handset off the base Handset on the baseHandset earpiece volume Adjusting the ringer and earpiece volumeRedialing a call Using the speaker phone Mute When speaking on the baseWhen speaking on the handset When phone is ringingOn the base Storing phone numbersOn the handeset One touch memory dialing Making calls with memory dialingErasing a stored phone number From the handset Way conferencing When the handset is off the baseIntercom from the handset to base To transfer from the base to the handset Transferring a callTo transfer from the handset to the base Changing the digital security code To attach the beltclip To remove the beltclip Installing the beltclipHeadset installation Battery replacement and handling MaintenanceSymptom Suggestion TroubleshootingHandset SpecificationsGeneral Base unitV, W, X, Y, Z IndexK, L Page Page Page UCZZ01622ZZ