Uniden EXL 8945 manual Battery use time per charge, When the battery charge becomes low

Page 14

Even when the battery pack is not being used, it will gradually discharge over a long period. For optimum performance, be sure to return the handset to the base unit after a telephone call for charging the battery.

Battery use time (per charge)

From fully charged

•Seven hours coutinuous use.

•Seven days when the handset is in the standby mode.

When the battery charge becomes low

When the voltage of battery pack in the handset is very low and needs to be charged, the phone is programmed to eliminate functions in order to save power. If the battery charge becomes low Battery lamp blinks. If the phone is in use, the handset beeps. Complete your conversation as quickly as possible and return the handset to the base unit for charging.

The built-in memory backup can hold numbers and names stored in the memory for up to 2 minutes, while you replace the battery pack.

If you must replace the battery pack during a telephone call, complete the replacement of the battery pack within 30 seconds, and you can return to the original call.

Rechargeable batteries have a memory effect that reduces standby and talk time. To avoid this memory effect, on a monthly basis, use the phone until the batt LED blinks. Then charge the battery for 15 hours.

Cleaning the battery contacts

To maintain a good charge, it is important to clean all battery contacts on the handset and base unit about once a month. Use a pencil eraser or other contact cleaner.

Do not use any liquids or solvents.

11

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Page Features IntroductionControls and functions Long Dst40 41 42 Contents Handset Read this firstBase unit Checking the package contents Setting up the base unit Choose the best locationIf you want to install the base unit on the wall, see Connect the base unitPulse Choose the dialing modeIf your dialing system is Set the switch to Tone If you arent sure of your dialing systemMounting the base unit on a wall Standard wall plate mountingDirect wall plate mounting Preparing the battery pack Status LEDCleaning the battery contacts Battery use time per chargeWhen the battery charge becomes low Do not use any liquids or solventsFrom the base Making a callFrom the handset Other OperationsLDM call from the handset Using the Long Distance Manager LDMPlacing a call using LDM LDM call from the baseDo not USE LongDst Button to Dial Private Branch Exchange PBX dialingFrom the handset Handset on the base Handset off the baseAdjusting the ringer and earpiece volume Handset earpiece volumeRedialing a call Using the speaker phone When phone is ringing When speaking on the baseWhen speaking on the handset MuteOn the base Storing phone numbersOn the handeset Making calls with memory dialing One touch memory dialingErasing a stored phone number From the handset When the handset is off the base Way conferencingIntercom from the handset to base To transfer from the base to the handset Transferring a callTo transfer from the handset to the base Changing the digital security code To attach the beltclip To remove the beltclip Installing the beltclipHeadset installation Maintenance Battery replacement and handlingTroubleshooting Symptom SuggestionBase unit SpecificationsGeneral HandsetV, W, X, Y, Z IndexK, L Page Page Page UCZZ01622ZZ
Top Page Image Contents