Uniden EXL 8945 Connect the base unit, If you want to install the base unit on the wall, see

Page 9

Connect the base unit

If you want to install the base unit on the wall, see page 8.

Route the cord.

Place the power cord so it does not create a trip hazard, or where it could become chafed and create a fire or electrical hazard.

2

To AC outlet

To DC IN 9V

AC adapter

1 (supplied) To telephone outlet

Telephone line cord (supplied)

To TEL LINE

1 Connect the telephone line cord to the TEL LINE jack and to a telephone outlet.

2 Connect the AC adapter to the DC IN 9V jack and to a standard 120V AC wall outlet.

3 Set the base unit on a desk or tabletop and place the handset on the base unit.

Then raise the antenna to a vertical position.

6

Image 9

Contents Page Introduction FeaturesLong Dst Controls and functions40 41 42 Contents Read this first Base unitHandset Checking the package contents Choose the best location Setting up the base unitConnect the base unit If you want to install the base unit on the wall, seeIf your dialing system is Set the switch to Tone Choose the dialing modePulse If you arent sure of your dialing systemStandard wall plate mounting Mounting the base unit on a wallDirect wall plate mounting Status LED Preparing the battery packWhen the battery charge becomes low Battery use time per chargeCleaning the battery contacts Do not use any liquids or solventsFrom the handset Making a callFrom the base Other OperationsPlacing a call using LDM Using the Long Distance Manager LDMLDM call from the handset LDM call from the basePrivate Branch Exchange PBX dialing From the handsetDo not USE LongDst Button to Dial Handset off the base Handset on the baseHandset earpiece volume Adjusting the ringer and earpiece volumeRedialing a call Using the speaker phone When speaking on the handset When speaking on the baseWhen phone is ringing MuteStoring phone numbers On the handesetOn the base One touch memory dialing Making calls with memory dialingErasing a stored phone number From the handset Way conferencing When the handset is off the baseIntercom from the handset to base Transferring a call To transfer from the handset to the baseTo transfer from the base to the handset Changing the digital security code Installing the beltclip Headset installationTo attach the beltclip To remove the beltclip Battery replacement and handling MaintenanceSymptom Suggestion TroubleshootingGeneral SpecificationsBase unit HandsetIndex K, LV, W, X, Y, Z Page Page Page UCZZ01622ZZ