Uniden EXL 8945 manual Storing phone numbers, On the handeset, On the base

Page 23

Storing phone numbers

Your EXL 8945 stores up to 10 numbers in handset plus 10 numbers in the base.

On the handeset

You must press a key within 20 seconds or the phone will return to standby. If you return the handset to the cradle, the phone will return to standby too. Press

memory and you can go to memory menu at any time.

MEMORY DIALING

On the base

status LED

1 Press and hold memory in the standby mode.

2 Enter the number you wish to store (up to 20 digits)

3	Press memory	again.
4	Press the 0 to	9 on the keypad
	to select the memory location you
	wish to store the number.

5 The confirmation beep indicates the number has been stored.

1 Press memory .

The status LED blinks.

2 Dial the number you wish to store.

3 Press memory .

Press 0 to 9 on the keypad to select the memory location you wish to store the number.

The status LED goes out.

A confirmation beep indicates the number is stored.

	When entering numbers, you may press redial/p to
NOTES	enter a pause in the dialing sequence.

NOTES

You cannot store phone numbers directly into the one-touch dial keys. See page 21 for one touch

dialing.20

Image 23

Contents Page Introduction FeaturesLong Dst Controls and functions40 41 42 Contents Handset Read this firstBase unit Checking the package contents Choose the best location Setting up the base unitConnect the base unit If you want to install the base unit on the wall, seeIf you arent sure of your dialing system Choose the dialing modeIf your dialing system is Set the switch to Tone PulseStandard wall plate mounting Mounting the base unit on a wallDirect wall plate mounting Status LED Preparing the battery packDo not use any liquids or solvents Battery use time per chargeWhen the battery charge becomes low Cleaning the battery contactsOther Operations Making a callFrom the handset From the baseLDM call from the base Using the Long Distance Manager LDMPlacing a call using LDM LDM call from the handsetDo not USE LongDst Button to Dial Private Branch Exchange PBX dialingFrom the handset Handset off the base Handset on the baseHandset earpiece volume Adjusting the ringer and earpiece volumeRedialing a call Using the speaker phone Mute When speaking on the baseWhen speaking on the handset When phone is ringingOn the base Storing phone numbersOn the handeset One touch memory dialing Making calls with memory dialingErasing a stored phone number From the handset Way conferencing When the handset is off the baseIntercom from the handset to base To transfer from the base to the handset Transferring a callTo transfer from the handset to the base Changing the digital security code To attach the beltclip To remove the beltclip Installing the beltclipHeadset installation Battery replacement and handling MaintenanceSymptom Suggestion TroubleshootingHandset SpecificationsGeneral Base unitV, W, X, Y, Z IndexK, L Page Page Page UCZZ01622ZZ