Uniden EXL 8945 manual Direct wall plate mounting

Page 12

8 On the base unit, pull the

Handset retainer

handset retainer out of the slot. Rotate it clockwise 180 degrees.

9 Flip the retainer from front to back. Slide it back into the slot so that the lip of the retainer is up and the oval is down. The retainer holds the handset in place.

Direct wall plate mounting

If you don't have a standard wall plate, you can mount your phone directly to the wall. Before doing this, consider the following:

•Avoid electrical cables, pipes, or other items behind the mounting location that could cause a hazard when inserting screws into the wall.

•Try to mount your phone within 10 - 15 feet of a working phone jack to avoid excessive cord lengths.

•Make sure the wall material is capable of supporting the weight of the base and handset.

TOP								1 Insert two mounting screws
							3/16 in.	1 Insert two mounting screws
							3/16 in.	into the wall, (with their
								into the wall, (with their
								appropriate anchoring device),
								appropriate anchoring device),
								3-15/16 inches apart. Allow
								about 3/16 of an inch between
							3-15/16 in.	the wall and screwheads for
								mounting the phone.
								2 Refer to steps 1 through 9 on
								page 8 and 9 to mount the
								telephone.

9

Image 12

Contents Page Features IntroductionControls and functions Long Dst40 41 42 Contents Read this first Base unitHandset Checking the package contents Setting up the base unit Choose the best location If you want to install the base unit on the wall, see Connect the base unitChoose the dialing mode If your dialing system is Set the switch to TonePulse If you arent sure of your dialing systemMounting the base unit on a wall Standard wall plate mountingDirect wall plate mounting Preparing the battery pack Status LEDBattery use time per charge When the battery charge becomes lowCleaning the battery contacts Do not use any liquids or solventsMaking a call From the handsetFrom the base Other OperationsUsing the Long Distance Manager LDM Placing a call using LDMLDM call from the handset LDM call from the basePrivate Branch Exchange PBX dialing From the handsetDo not USE LongDst Button to Dial Handset on the base Handset off the baseAdjusting the ringer and earpiece volume Handset earpiece volumeRedialing a call Using the speaker phone When speaking on the base When speaking on the handsetWhen phone is ringing MuteStoring phone numbers On the handesetOn the base Making calls with memory dialing One touch memory dialingErasing a stored phone number From the handset When the handset is off the base Way conferencingIntercom from the handset to base Transferring a call To transfer from the handset to the baseTo transfer from the base to the handset Changing the digital security code Installing the beltclip Headset installationTo attach the beltclip To remove the beltclip Maintenance Battery replacement and handlingTroubleshooting Symptom SuggestionSpecifications GeneralBase unit HandsetIndex K, LV, W, X, Y, Z Page Page Page UCZZ01622ZZ