Uniden EXL 8945 manual Preparing the battery pack, Status LED

Page 13

Use only Uniden Battery BT-905.

Preparing the battery pack

Charge the battery pack for more than 12-15 hours before you start using your phone.

1	Press the battery cover release.
2	Connect the battery pack
	connector with the correct
	polarity (black and red wires),
	then insert the battery pack
Black	into the battery compartment.
Red
3	Slide the battery cover forward
	until it snaps into place.

4 Place the handset on the base. Make sure that the “status” LED of the base unit lights, and charging begins. Charge the battery for at 12-15 hours.

You can place either side up for charging the battery.

status LED

10

Image 13

Contents Page Introduction FeaturesLong Dst Controls and functions40 41 42 Contents Base unit Read this firstHandset Checking the package contents Choose the best location Setting up the base unitConnect the base unit If you want to install the base unit on the wall, seeIf your dialing system is Set the switch to Tone Choose the dialing modePulse If you arent sure of your dialing systemStandard wall plate mounting Mounting the base unit on a wallDirect wall plate mounting Status LED Preparing the battery packWhen the battery charge becomes low Battery use time per chargeCleaning the battery contacts Do not use any liquids or solventsFrom the handset Making a callFrom the base Other OperationsPlacing a call using LDM Using the Long Distance Manager LDMLDM call from the handset LDM call from the baseFrom the handset Private Branch Exchange PBX dialingDo not USE LongDst Button to Dial Handset off the base Handset on the baseHandset earpiece volume Adjusting the ringer and earpiece volumeRedialing a call Using the speaker phone When speaking on the handset When speaking on the baseWhen phone is ringing MuteOn the handeset Storing phone numbersOn the base One touch memory dialing Making calls with memory dialingErasing a stored phone number From the handset Way conferencing When the handset is off the baseIntercom from the handset to base To transfer from the handset to the base Transferring a callTo transfer from the base to the handset Changing the digital security code Headset installation Installing the beltclipTo attach the beltclip To remove the beltclip Battery replacement and handling MaintenanceSymptom Suggestion TroubleshootingGeneral SpecificationsBase unit HandsetK, L IndexV, W, X, Y, Z Page Page Page UCZZ01622ZZ