Uniden EXL 8945 manual Maintenance, Battery replacement and handling

Page 31

Note on power sources

Battery replacement and handling

When the operating time becomes short, even after a battery is recharged, please replace the battery.

With normal usage, your battery should last about one year. Please contact your place of purchase for a replacement battery.

Power Failure

During the period that the power is off, you will not be able to make or receive calls with the telephone.

RECYCLING NICKEL- CADMIUM BATTERIES

NICKEL-

CADMIUM

BATTERIES

MUST BE

DISPOSED OF

Ni-CdPROPERLY.

Nickel-cadmium cells are used in the battery pack. Please take your used nickel- cadmium battery packs to a store that recycles nickel- cadmium batteries.

Caution

•Use the specified battery pack.

•Do not remove the battery from the handset to charge it.

•Never throw the battery into a fire, disassemble it, or heat it.

•Do not remove or damage the battery casing.

Maintenance

When slightly dirty

Wipe with a soft, dry cloth.

When very dirty

Wipe with a soft cloth that has been dampened with diluted, neutral detergent. Dry with a dry cloth.

When the charging terminals become dirty

Wipe with a pencil eraser or other contact cleaner.

Caution

Do not use paint thinner, benzene, alcohol, or other chemical products. Doing so may discolor the surface of the telephone and damage the finish.

28

Image 31

Contents Page Introduction FeaturesLong Dst Controls and functions40 41 42 Contents Base unit Read this firstHandset Checking the package contents Choose the best location Setting up the base unitConnect the base unit If you want to install the base unit on the wall, seeIf you arent sure of your dialing system Choose the dialing modeIf your dialing system is Set the switch to Tone PulseStandard wall plate mounting Mounting the base unit on a wallDirect wall plate mounting Status LED Preparing the battery packDo not use any liquids or solvents Battery use time per chargeWhen the battery charge becomes low Cleaning the battery contactsOther Operations Making a callFrom the handset From the baseLDM call from the base Using the Long Distance Manager LDMPlacing a call using LDM LDM call from the handsetFrom the handset Private Branch Exchange PBX dialingDo not USE LongDst Button to Dial Handset off the base Handset on the baseHandset earpiece volume Adjusting the ringer and earpiece volumeRedialing a call Using the speaker phone Mute When speaking on the baseWhen speaking on the handset When phone is ringingOn the handeset Storing phone numbersOn the base One touch memory dialing Making calls with memory dialingErasing a stored phone number From the handset Way conferencing When the handset is off the baseIntercom from the handset to base To transfer from the handset to the base Transferring a call To transfer from the base to the handset Changing the digital security code Headset installation Installing the beltclipTo attach the beltclip To remove the beltclip Battery replacement and handling MaintenanceSymptom Suggestion TroubleshootingHandset SpecificationsGeneral Base unitK, L IndexV, W, X, Y, Z Page Page Page UCZZ01622ZZ