Uniden EXI2926 owner manual Mounting the Base Unit on a Wall, Choose the dialing mode

Page 11

D. Choose the dialing mode

Most phone systems use tone dialing which sends DTMF tones through the phone lines.

However some phone systems still use pulse dialing such as in rural areas. The default setting is tone dialing. Depending on your dialing system, set the PULSE-TONE switch as follows:

If your dialing system is	Set the switch to
Tone	TONE
Pulse	PULSE

•If you aren´t sure of your dialing system,

make a trial call with the PULSE-TONE switch set to TONE.

If the call connects, leave the switch as is; otherwise, set to PULSE.

•If your phone system requires pulse dialing and you need to send DTMF tones for certain situations during a call, you may "switch-over" to tone dialing. (Refer to "Tone Dialing Switch-over" on page 15.)

Mounting the Base Unit on a Wall

Setting the handset retainer clip for wall mounting

1) On the base unit, pull the handset retainer out of the slot. Rotate it clockwise 180 degrees.

2) Flip the retainer from front to back.

Slide it back into the slot so that the lip of the retainer is up and the ▼ is down. The retainer holds the handset in place.

note

For 2 line subscriptions,

•If the two phone lines are in one modular jack, connect using TEL LINE 1-2jack.

•If the two phone lines are on two separate modular jacks, connect using both TEL LINE 1-2and TEL LINE 2 jacks.

GETTING STARTED

G E T T I N G S TA R T E D [ 9 ]

Image 11

Contents R D L E S S Welcome Features Contents Controls and Functions Tone Key Read This First Checking the Package Contents Choose the best location Setting up the PhoneDo the following steps Low battery alert Install the battery packBattery use time per charge Connect the base unit Cleaning the charging contactsMounting the Base Unit on a Wall Choose the dialing modeSetting the handset retainer clip for wall mounting Direct wall mounting Standard wall plate mountingSetting Caller ID Options Entering Your Area Code Basic 2-line operation Making and Receiving CallsTerminology Redial Adjusting the Handset Ringer and Earpiece VolumeTip Selecting a Different Channel Tone Dialing Switch-overUsing the Page Feature Traveling Out-of-RangeMaking a Call from the Base Flash and Call WaitingAnswering a Call from the Base Answering a Call from the HandsetPlacing a Call on Hold Using the Speakerphone Mute FeatureDialing from talk mode Making a Call from the HandsetExtension In Use Line OperationWay Conferencing I N E F E AT U R E S Paging from the base to handset Using Your EXI2926 IntercomUsing the Speakerphone Transferring CallsWith the base Storing a Phone Number in MemoryWith the handset Chain Dialing Making Calls with Memory DialingJohn Smith Editing a Stored Name and/or Phone NumberErasing a Stored Name and Phone Number Caller ID When the Telephone RingsCalling a Caller ID name/number Using the Caller ID ListViewing the Caller ID Message List Deleting a Caller ID message Deleting Information from the Caller ID ListStoring a Caller ID number in a memory location Deleting all Caller ID name/numbers Using Cidcw Caller ID with Call WaitingTo attach the beltclip Installing the BeltclipHeadset Installation Changing the Digital Security CodeMaintenance Troubleshooting Technical Information General InformationCordless Telephone Privacy Radio InterferenceMore Than One Cordless Telephone Index Please do not Return this Product to the Place of Purchase At Uniden, we´ll take care of youUCZZ01318BZ