Uniden EXI2926 owner manual Flash and Call Waiting, Answering a Call from the Base

Page 18

note

The flash feature does not function when line 1 and line 2 are on a conference call. (See 3-way conferencing and 4- way conferencing, pages 18 and 19).

note

If you set the handset in AutoTalk on, and the handset is on the base, just pick up the handset and speak. Each line setting is independent for this feature.

Flash and Call Waiting

If you have "Call Waiting" service and a call waiting tone sounds while you are on a call, press delete/flash to accept the waiting call. There is a short pause, then you will hear the new caller. To return to the original caller, press delete/flash again.

note You must subscribe through your local telephone company to receive Call Waiting Service.

Answering a Call from the Base

1) The base rings. The corresponding line 1 LED on the base flashes.

2) Press the line 1 and speak.

3) When you f inish the call, press line 1 to hang up.

Answering a Call from the Handset

1) The handset rings and the following screen appears:

(Call) Line 1

2) Press the line 1 to answer your call.

3) When you finish the call, press line 1 on the handset, or return the handset to the base.

Making a Call from the Base

1) Press line 1.

2) Dial the number on the keypad, or use one of the memory features. (See "Making Calls with Memory Dialing", page 22.)

3) When you f inish the call, press line 1 to hang up.

[ 16 ] B A S I C S

Image 18

Contents R D L E S S Welcome Features Contents Controls and Functions Tone Key Read This First Checking the Package Contents Setting up the Phone Do the following stepsChoose the best location Install the battery pack Battery use time per chargeLow battery alert Cleaning the charging contacts Connect the base unitChoose the dialing mode Setting the handset retainer clip for wall mountingMounting the Base Unit on a Wall Standard wall plate mounting Direct wall mountingSetting Caller ID Options Entering Your Area Code Making and Receiving Calls TerminologyBasic 2-line operation Adjusting the Handset Ringer and Earpiece Volume TipRedial Traveling Out-of-Range Tone Dialing Switch-overUsing the Page Feature Selecting a Different ChannelAnswering a Call from the Handset Flash and Call WaitingAnswering a Call from the Base Making a Call from the BaseMaking a Call from the Handset Using the Speakerphone Mute FeatureDialing from talk mode Placing a Call on HoldLine Operation Way ConferencingExtension In Use I N E F E AT U R E S Transferring Calls Using Your EXI2926 IntercomUsing the Speakerphone Paging from the base to handsetStoring a Phone Number in Memory With the handsetWith the base Making Calls with Memory Dialing Chain DialingEditing a Stored Name and/or Phone Number John SmithErasing a Stored Name and Phone Number When the Telephone Rings Caller IDUsing the Caller ID List Viewing the Caller ID Message ListCalling a Caller ID name/number Deleting Information from the Caller ID List Storing a Caller ID number in a memory locationDeleting a Caller ID message Using Cidcw Caller ID with Call Waiting Deleting all Caller ID name/numbersChanging the Digital Security Code Installing the BeltclipHeadset Installation To attach the beltclipMaintenance Troubleshooting General Information Technical InformationRadio Interference More Than One Cordless TelephoneCordless Telephone Privacy Index At Uniden, we´ll take care of you Please do not Return this Product to the Place of PurchaseUCZZ01318BZ