Uniden EXI2926 Changing the Digital Security Code, Installing the Beltclip, Headset Installation

Page 31

Changing the Digital Security Code

The digital security code is an identif ication code used to connect the handset and the base unit. Normally, setting the code is not necessary.

The f irst time you charge your handset, the security code is automatically set. (See page 4.) In the rare situation that you suspect another cordless telephone is using the same security code, you can change the code.

1) Remove the handset from the base unit.

2) Press and hold intercom on the base.

3)The handset is emitting the paging sound place the handset on the base unit. While holding intercom for at least 3 seconds, the paging sound stops. Leave the handset on the base for more than 3 seconds or until the status LED stops flashing. A random, new security code is set.

note

•If the handset battery pack is completely discharged or the battery pack is removed, the digital security code will be lost. If this happens, a new security code

Installing the Beltclip

To attach the beltclip

Insert the beltclip into the holes on each side of the handset. Press down until it clicks.

To remove the beltclip

Pull both sides of the beltclip to release the tabs from the holes.

Headset Installation

Your phone may be used with an optional headset, the Uniden HS910. To use this feature, insert headset plug into the headset jack. Your phone is ready for hands-free conversations. (Headset may be purchased by calling the Uniden Parts Department or visiting the web site. See Page 5.)

If you are using an optional headset, you must still use the handset keypad for phone operations.

is set automatically next time the battery pack is charged.

•If the beltclip is attached, you can only charge the handset in the face down position.

•Use only Uniden HS910 headset specifically designed for Uniden phones.

ADDITIONAL INFORMATION

A D D I T I O N A L I N F O R M AT I O N [ 29 ]

Page 30 Page 32
Image 31
Page 30 Page 32
Contents R D L E S S Welcome Features Contents Controls and Functions Tone Key Read This First Checking the Package Contents Do the following steps Setting up the PhoneChoose the best location Battery use time per charge Install the battery packLow battery alert Connect the base unit Cleaning the charging contactsSetting the handset retainer clip for wall mounting Choose the dialing modeMounting the Base Unit on a Wall Direct wall mounting Standard wall plate mountingSetting Caller ID Options Entering Your Area Code Terminology Making and Receiving CallsBasic 2-line operation Tip Adjusting the Handset Ringer and Earpiece VolumeRedial Selecting a Different Channel Tone Dialing Switch-overUsing the Page Feature Traveling Out-of-RangeMaking a Call from the Base Flash and Call WaitingAnswering a Call from the Base Answering a Call from the HandsetPlacing a Call on Hold Using the Speakerphone Mute FeatureDialing from talk mode Making a Call from the HandsetWay Conferencing Line OperationExtension In Use I N E F E AT U R E S Paging from the base to handset Using Your EXI2926 IntercomUsing the Speakerphone Transferring CallsWith the handset Storing a Phone Number in MemoryWith the base Chain Dialing Making Calls with Memory DialingJohn Smith Editing a Stored Name and/or Phone NumberErasing a Stored Name and Phone Number Caller ID When the Telephone RingsViewing the Caller ID Message List Using the Caller ID ListCalling a Caller ID name/number Storing a Caller ID number in a memory location Deleting Information from the Caller ID ListDeleting a Caller ID message Deleting all Caller ID name/numbers Using Cidcw Caller ID with Call WaitingTo attach the beltclip Installing the BeltclipHeadset Installation Changing the Digital Security CodeMaintenance Troubleshooting Technical Information General InformationMore Than One Cordless Telephone Radio InterferenceCordless Telephone Privacy Index Please do not Return this Product to the Place of Purchase At Uniden, we´ll take care of youUCZZ01318BZ
Top Page Image Contents