1) Insert two mounting screws into the wall, (with their appropriate anchoring device),
2) Set the retainer clip if necessary.
3) Refer to steps 1 through 9 on page 10 to mount the telephone.
Setting Caller ID Options
There are three Caller ID setup options available; they are AutoTalk, CIDCW (Caller ID on Call Waiting), and Area Code. See page 12 for Area Code setup instructions.
AutoTalk allows you to answer the phone without pressing line 1 or line 2.
If the phone rings when AutoTalk is on, simply remove the handset from the base and the phone automatically answers the call. Or if the handset is not on the base, press any key to answer the call. If the phone rings when AutoTalk is off, you must press line 1 or line 2 to answer the call.
Caller ID on Call Waiting (CIDCW) performs the same as regular Caller ID on a call waiting number. You must subscribe to CIDCW from your phone company in order to use this feature.
GETTING STARTED
To change your Caller ID options:.
1)When the phone is in the standby mode, press and hold call id/hold until the Caller ID setting screen appears.
2)Press ▲up/int’com or dn▼/conf to select "Line 1" or "Line 2".
3)Press sel/vol.
The following screen appears.
Caller ID Setup
1 Line 1
2 Line 2
1 Auto Talk:Off
2 CIDCW :On
3 Area Code:
4)Press ▲up/int’com or dn▼/conf to move the cursor to the selection that you would like to change. Press the sel/vol key to toggle between "On" and "Off". Press sel/vol. Use the number keypad to enter or change the area code. Press sel/vol again.
5) Af ter you have made your selections, press call id/hold or return the handset to the base.
G E T T I N G S TA R T E D [ 11 ]