4-Way Conferencing
A fourth person, at either the handset or the base, may be added to conference call.
For example, to add a fourth party at the handset to an ongoing conference call at the base:
1)Press hold. The line 1 and line 2 LEDs turn red.
2)Press intercom on the base to contact the handset.
3)Press ▲up/int’com on the handset. Speak to answer the page.
4)Press conference at the base or dn▼/conf at the handset to bring the party at the handset in on the call.
The line 1 and line 2 LEDs are green.
The following screen appears:
5)To remove either caller from your conversation, ask one of the parties to hang up. Press the corresponding line button to end the call.
(Conference)
Line 1 Line 2
tip
•When a call is on hold at the handset, and the base is paged, the base will ring even when the RING VOL switch is set to OFF.
•The person at the handset can join the conversation by pressing the line number currently in use.