Editing a Stored Name and/or Phone Number
To edit a number you have stored in the handset.
1)Pick up the handset from the base.
2)Press and hold m for two seconds.
The display shows the "Memory Store" screen and any saved name/numbers.
3)Use the ▲up/int’com and dn▼/conf, or number keypad, to select the memory location you would like to edit.
4) Press sel/vol. The display shows the memory location you have selected.
5)Press sel/vol again to enter the "Edit Memory" mode.
6)Press sel/vol. The following screen appears, and a cursor flashes indicating that the display is ready to edit the name.
7)Enter the name with the ▲up/int’com and dn▼/conf.
Use the ▲up/int’com and dn▼/conf keys to enter symbols.
Use the */t/tone and #/s keys to move the cursor left and right. Press delete/flash to remove any unwanted character.
8)Press sel/vol. The following screen appears. A cursor flashes
indicating that the display is ready for the number to be edited.
9)Enter the phone number with the number keypad (direct entry). Press delete/flash to remove any unwanted character.
Press and hold delete/flash to clear the entire number.
10)Press sel/vol. The handset beeps and displays the conf irmation screen.
11)The display then returns to the "Memory store" screen. You may select another number to edit (return to step 3) or press m to return to standby. To edit a number stored in the base, repeat the steps for storing numbers in the base. (See page 21.) This will simply overwrite the number that was previously stored in the location.
Memory Store
01 JOHN SMITH
02 UNIDEN
Edit Memory01
Delete Memory01
Go Back
Store Name
JOHN SMITH
Store Number 8175551
Memory01 Stored
note
•Whenever you are using a menu screen, you must press a key within 20 seconds or the phone will return to standby. You may also press m to exit a memory menu at any time.
•If you select "Go Back" at any time, no changes are made and the handset shows the "Memory Store" screen.
MEMORY FEATURES