Uniden EXS 9995 manual Headset Installation, Automatic Digital Code Security, Wait for 5 seconds

Page 15

Use only the Uniden HS910 headset specifically designed for Spread Spectrum phones. You may hear a buzz or hum on other headsets.

Keep the headset wire away from handset and base antennas.

HEADSET INSTALLATION

Your phone may be used with an optional headset, the Uniden HS910. To use this feature, simply plug the headset plug into the headset jack. Your phone is ready for hands-free conversation.

If you are using an optional headset, you must still use the handset keypad for phone operations.

AUTOMATIC DIGITAL CODE SECURITY

To prevent other parties from making unauthorized calls on your phone line, a digital code was added to the EXS 9995. Your phone’s handset and base share this code. If the phone experiences a power failure, you must reset the digital security code by placing the handset in the base.

▼To reset the digital security code

1. Remove the handset from the base, hold down page/int’com and you will hear the beep.

2. Replace the handset on the base while holding page/int’com. The paging stops.

3.Wait for 5 seconds.

The status LED flashes to indicate that the digital security code is reset.

13

Image 15

Contents Page Controls and Functions Contents Welcome FeaturesIncluded in Your Package Selecting a Location Switch to interrupt its powerDESK/TABLETOP Installation Standard wall plate mounting Wall InstallationDirect wall mounting Installing the Handset Battery Pack Pull the cover of battery charger Charging the Battery PackInitial battery charging Charging optional battery packsCleaning the Battery Contacts Setting the PULSE/TONE SwitchLow battery indicator Adjusting the Volume Controls Pull both side of the tabs from the holes Installing the BeltclipTo attach the beltclip To remove the beltclipWait for 5 seconds Headset InstallationTo reset the digital security code Automatic Digital Code SecurityBasic 2-line operation Making and Receiving CallsAnswering a Call from the Base When you finish the call, press line 1 to hang upPick up the handset Press line Dialing from Talk ModeMaking a Call from the Handset Handset rings and the following Screen appearsUsing the Tone Feature Dialing from Standby ModeFlash and Call Waiting Using Redial Placing a Call on HoldTo redial from the handset Using the Mute Feature Using the page FeatureHandset beeps for 60 seconds Following screen appears Extension In Use Line OperationWAY Conferencing Press call id/hold Using Your EXS 9995 Intercom From the Base to the HandsetPress page/int’com on the base From Handset to Base Transferring a CallOn the handset, Press line 1 to talk Traveling OUT-OF-RANGEOn the Handset Storing a Phone Number in MemoryWhen you have finished entering a name, press select Editing a Phone Number in Memory Store Number Erasing a Number from Memory After erasing a number, you may add a new address to memoryFrom the Handset Page Using Memory Dialing Standby Mode Dialing from the HandsetPress line 1. The number dials Number dials Talk Mode Dialing from the HandsetTurning AutoTalk and Caller ID/Call Waiting On or Off Using Caller IDSetting up Caller ID options To change your Caller ID optionsScreening Your Calls Programming Your Area CodeReviewing Caller ID name/numbers Line Select. The following screen appears Storing a Caller ID number in a memory locationTo delete a single Caller ID message, follow the steps below Deleting a Caller ID messagePress del/conf to delete name/numbers Deleting all Caller ID name/numbersUsing Cidcw Caller ID with Call Waiting Setting UP Your Answering System Turning the answering system on/offPress and hold clock until a tone sounds Setting Your Greeting Prerecorded GreetingRecording your Personal/User Greeting Press greeting to play the current greeting Choosing between Prerecorded and User GreetingsAnnounce only feature Selecting a PIN CodeLine 1 and line 2 must use the same PIN code Ring time switch is common for line 1 and line Setting Ring Rime SwitchPlaying your messages Using Your Answering SystemRepeating a Message Skipping a MessagePress skip at any time to skip to the next message Deleting all messages Deleting a MessageVoice Memo Deleting individual messageTo stop the recording, press voice memo or play/stop Recording a ConversationRemote Access Away from Home Remote Rome Monitor Quick Reference Chart Call-in features Adjust the speaker volume on the baseMake sure you are using the correct PIN code Call-in features fromMemo Memo At Uniden, we’ll take care of you