Uniden EXS 9995 manual Using the Tone Feature, Flash and Call Waiting, Dialing from Standby Mode

Page 19

You may enter a pause in the dialing sequence during Standby Mode.

You may not enter a pause in the dialing sequence during Talk Mode.

The tone feature applies only when the base is set to pulse.

The flash feature does not function when line 1 and line 2 are on a conference call. (See the 3-WAY CONFERENCING and 4-WAY CONFERENCING, pages 21 and 22.)

▼Dialing from Standby Mode

1.Pick up the handset.

2.Use one of the memory features. (See Using Memory Dialing, page 32).

3.Press line 1.

4.When you finish the call, press line 1, or return the handset to the base.

USING THE TONE FEATURE

If you are dialing in the pulse mode and need to enter tone digits, press tone then enter the digits. Once the call has ended, tone mode is canceled and pulse dialing resumes.

FLASH AND CALL WAITING

If you have Call Waiting service and a call waiting tone sounds, press flash to accept the call. After a short pause you will hear the new caller. To return to the original caller, press flash again.

17

Image 19

Contents Page Controls and Functions Contents Welcome FeaturesIncluded in Your Package Selecting a Location Switch to interrupt its powerDESK/TABLETOP Installation Standard wall plate mounting Wall InstallationDirect wall mounting Installing the Handset Battery Pack Pull the cover of battery charger Charging the Battery PackInitial battery charging Charging optional battery packsSetting the PULSE/TONE Switch Cleaning the Battery ContactsLow battery indicator Adjusting the Volume Controls Pull both side of the tabs from the holes Installing the BeltclipTo attach the beltclip To remove the beltclipWait for 5 seconds Headset InstallationTo reset the digital security code Automatic Digital Code SecurityBasic 2-line operation Making and Receiving CallsAnswering a Call from the Base When you finish the call, press line 1 to hang upPick up the handset Press line Dialing from Talk ModeMaking a Call from the Handset Handset rings and the following Screen appearsDialing from Standby Mode Using the Tone FeatureFlash and Call Waiting Placing a Call on Hold Using RedialTo redial from the handset Using the page Feature Using the Mute FeatureHandset beeps for 60 seconds Following screen appears Extension In Use Line OperationWAY Conferencing Press call id/hold From the Base to the Handset Using Your EXS 9995 IntercomPress page/int’com on the base From Handset to Base Transferring a CallOn the handset, Press line 1 to talk Traveling OUT-OF-RANGEOn the Handset Storing a Phone Number in MemoryWhen you have finished entering a name, press select Editing a Phone Number in Memory Store Number After erasing a number, you may add a new address to memory Erasing a Number from MemoryFrom the Handset Page Standby Mode Dialing from the Handset Using Memory DialingPress line 1. The number dials Number dials Talk Mode Dialing from the HandsetTurning AutoTalk and Caller ID/Call Waiting On or Off Using Caller IDSetting up Caller ID options To change your Caller ID optionsScreening Your Calls Programming Your Area CodeReviewing Caller ID name/numbers Line Select. The following screen appears Storing a Caller ID number in a memory locationTo delete a single Caller ID message, follow the steps below Deleting a Caller ID messagePress del/conf to delete name/numbers Deleting all Caller ID name/numbersUsing Cidcw Caller ID with Call Waiting Turning the answering system on/off Setting UP Your Answering SystemPress and hold clock until a tone sounds Prerecorded Greeting Setting Your GreetingRecording your Personal/User Greeting Press greeting to play the current greeting Choosing between Prerecorded and User GreetingsSelecting a PIN Code Announce only featureLine 1 and line 2 must use the same PIN code Ring time switch is common for line 1 and line Setting Ring Rime SwitchPlaying your messages Using Your Answering SystemSkipping a Message Repeating a MessagePress skip at any time to skip to the next message Deleting all messages Deleting a MessageVoice Memo Deleting individual messageTo stop the recording, press voice memo or play/stop Recording a ConversationRemote Access Away from Home Remote Rome Monitor Quick Reference Chart Call-in features Adjust the speaker volume on the baseMake sure you are using the correct PIN code Call-in features fromMemo Memo At Uniden, we’ll take care of you