Uniden EXS 9995 manual Selecting a Location, Switch to interrupt its power

Page 6

INSTALLING AND ADJUSTING YOUR PHONE

SELECTING A LOCATION

Before choosing a location for your new phone, read the Installation Considerations included in the Precautions and Important Safety Instructions brochure. Here are some important guidelines you should consider:

•The location should be close to both a phone jack and a continuous power outlet. (A continuous power outlet is an AC outlet which does not have a

switch to interrupt its power.)

• Keep the base and handset away from sources of electrical noise such as motors and fluorescent lighting.

•Be sure there is sufficient space to rotate the base antenna fully vertical.

•The base can be placed on a desk, tabletop or mounted on a standard wall plate.

•You should charge your handset for 15-20 hours before connecting the phone line.

•If your second phone line has a separate jack, place your phone so you can access both jacks.

4

Image 6

Contents Page Controls and Functions Contents Features WelcomeIncluded in Your Package Switch to interrupt its power Selecting a LocationDESK/TABLETOP Installation Wall Installation Standard wall plate mountingDirect wall mounting Installing the Handset Battery Pack Charging optional battery packs Charging the Battery PackInitial battery charging Pull the cover of battery chargerCleaning the Battery Contacts Setting the PULSE/TONE SwitchLow battery indicator Adjusting the Volume Controls To remove the beltclip Installing the BeltclipTo attach the beltclip Pull both side of the tabs from the holesAutomatic Digital Code Security Headset InstallationTo reset the digital security code Wait for 5 secondsMaking and Receiving Calls Basic 2-line operationWhen you finish the call, press line 1 to hang up Answering a Call from the BaseHandset rings and the following Screen appears Dialing from Talk ModeMaking a Call from the Handset Pick up the handset Press lineUsing the Tone Feature Dialing from Standby ModeFlash and Call Waiting Using Redial Placing a Call on HoldTo redial from the handset Using the Mute Feature Using the page FeatureHandset beeps for 60 seconds Following screen appears Line Operation Extension In UseWAY Conferencing Press call id/hold Using Your EXS 9995 Intercom From the Base to the HandsetPress page/int’com on the base Transferring a Call From Handset to BaseTraveling OUT-OF-RANGE On the handset, Press line 1 to talkStoring a Phone Number in Memory On the HandsetWhen you have finished entering a name, press select Editing a Phone Number in Memory Store Number Erasing a Number from Memory After erasing a number, you may add a new address to memoryFrom the Handset Page Using Memory Dialing Standby Mode Dialing from the HandsetPress line 1. The number dials Talk Mode Dialing from the Handset Number dialsTo change your Caller ID options Using Caller IDSetting up Caller ID options Turning AutoTalk and Caller ID/Call Waiting On or OffProgramming Your Area Code Screening Your CallsReviewing Caller ID name/numbers Line Storing a Caller ID number in a memory location Select. The following screen appearsDeleting a Caller ID message To delete a single Caller ID message, follow the steps belowDeleting all Caller ID name/numbers Press del/conf to delete name/numbersUsing Cidcw Caller ID with Call Waiting Setting UP Your Answering System Turning the answering system on/offPress and hold clock until a tone sounds Setting Your Greeting Prerecorded GreetingRecording your Personal/User Greeting Choosing between Prerecorded and User Greetings Press greeting to play the current greetingAnnounce only feature Selecting a PIN CodeLine 1 and line 2 must use the same PIN code Setting Ring Rime Switch Ring time switch is common for line 1 and lineUsing Your Answering System Playing your messagesRepeating a Message Skipping a MessagePress skip at any time to skip to the next message Deleting individual message Deleting a MessageVoice Memo Deleting all messagesRecording a Conversation To stop the recording, press voice memo or play/stopRemote Access Away from Home Remote Rome Monitor Quick Reference Chart Call-in features from Adjust the speaker volume on the baseMake sure you are using the correct PIN code Call-in featuresMemo Memo At Uniden, we’ll take care of you