Uniden EXS 9995 manual Programming Your Area Code, Screening Your Calls

Page 37

1 Auto Talk : Off

2 CIDCW : On

3 Area Code :

Caller ID Setup 1 Line 1

2 Line 2

1 Auto Talk : Off

2 CIDCW : On

3 Area Code :

Line 1 Smith John 817-555-1212

4. If you want to set CIDCW, use the ▲ and ▼ keys to move the cursor to 2 CIDCW or you can press 2.

Press the select key to toggle between On and Off.

5.After you finish the setting, press call id/hold and return the handset to the base.

▼Programming Your Area Code

1. Press and hold call id/hold for two seconds. The following screen appears.

2. Use the ▲ and ▼ keys or the number key (1 or 2) to select Line 1 or Line 2. Then press select.

The following screen appears.

3. Use the ▲ and ▼ keys to move the cursor to select 3 Area Code:

Press select. Use the number keypad to enter or change the area code. Press select again.

4.After you have made your selections, press

call id/hold and return the handset to the base.

▼Screening Your Calls

Caller ID allows you to review caller information before answering your phone. At the beginning of the second ring, the display shows the line number,

that is being used, name, and phone number of the caller. If your Caller ID service is number only, the name does not appear on the second line.

If a name or number is not available, the display shows a message such as Incomplete Data, Private Number, Private Name, etc.

35

Image 37

Contents Page Controls and Functions Contents Welcome FeaturesIncluded in Your Package Selecting a Location Switch to interrupt its powerDESK/TABLETOP Installation Standard wall plate mounting Wall InstallationDirect wall mounting Installing the Handset Battery Pack Initial battery charging Charging the Battery PackCharging optional battery packs Pull the cover of battery chargerSetting the PULSE/TONE Switch Cleaning the Battery ContactsLow battery indicator Adjusting the Volume Controls To attach the beltclip Installing the BeltclipTo remove the beltclip Pull both side of the tabs from the holesTo reset the digital security code Headset InstallationAutomatic Digital Code Security Wait for 5 secondsBasic 2-line operation Making and Receiving CallsAnswering a Call from the Base When you finish the call, press line 1 to hang upMaking a Call from the Handset Dialing from Talk ModeHandset rings and the following Screen appears Pick up the handset Press lineDialing from Standby Mode Using the Tone FeatureFlash and Call Waiting Placing a Call on Hold Using RedialTo redial from the handset Using the page Feature Using the Mute FeatureHandset beeps for 60 seconds Following screen appears Extension In Use Line OperationWAY Conferencing Press call id/hold From the Base to the Handset Using Your EXS 9995 IntercomPress page/int’com on the base From Handset to Base Transferring a CallOn the handset, Press line 1 to talk Traveling OUT-OF-RANGEOn the Handset Storing a Phone Number in MemoryWhen you have finished entering a name, press select Editing a Phone Number in Memory Store Number After erasing a number, you may add a new address to memory Erasing a Number from MemoryFrom the Handset Page Standby Mode Dialing from the Handset Using Memory DialingPress line 1. The number dials Number dials Talk Mode Dialing from the HandsetSetting up Caller ID options Using Caller IDTo change your Caller ID options Turning AutoTalk and Caller ID/Call Waiting On or OffScreening Your Calls Programming Your Area CodeReviewing Caller ID name/numbers Line Select. The following screen appears Storing a Caller ID number in a memory locationTo delete a single Caller ID message, follow the steps below Deleting a Caller ID messagePress del/conf to delete name/numbers Deleting all Caller ID name/numbersUsing Cidcw Caller ID with Call Waiting Turning the answering system on/off Setting UP Your Answering SystemPress and hold clock until a tone sounds Prerecorded Greeting Setting Your GreetingRecording your Personal/User Greeting Press greeting to play the current greeting Choosing between Prerecorded and User GreetingsSelecting a PIN Code Announce only featureLine 1 and line 2 must use the same PIN code Ring time switch is common for line 1 and line Setting Ring Rime SwitchPlaying your messages Using Your Answering SystemSkipping a Message Repeating a MessagePress skip at any time to skip to the next message Voice Memo Deleting a MessageDeleting individual message Deleting all messagesTo stop the recording, press voice memo or play/stop Recording a ConversationRemote Access Away from Home Remote Rome Monitor Quick Reference Chart Make sure you are using the correct PIN code Adjust the speaker volume on the baseCall-in features from Call-in featuresMemo Memo At Uniden, we’ll take care of you