Uniden EXS 9995 manual Quick Reference Chart

Page 55

TROUBLESHOOTING YOUR NEW PHONE

QUICK REFERENCE CHART

If your phone is not performing to your expectations, please try these simple steps before calling Uniden customer service at (800) 297-1023.

	PROBLEM	SUGGESTION

	The charge light won’t	• Make sure the AC adapter is plugged into the base
	come on when the	and wall outlet.
	handset is placed in	• Make sure the handset is properly seated in the base.
	the base.	• Make sure the handset is properly seated in the base.
	the base.	• Make sure the charging contacts on the handset and
		• Make sure the charging contacts on the handset and
		base are clean.

	The audio sounds	• Make sure that the base antenna is in a
	weak and/or scratchy.	vertical position.
		• Move the handset and/or base to a different location
		away from metal objects or appliances and try again.

	Can’t make or	• Check both ends of the base telephone line cord.
	receive calls.	• Make sure the AC adapter is plugged into the base
		• Make sure the AC adapter is plugged into the base
		and wall outlet.
		• Disconnect the AC adapter for a few minutes, then
		reconnect it.
		• Place the handset back on the charging cradle for a
		few seconds. The status LED blinks indicating that
		the phone has been reset.

	The handset doesn’t	• The Nickel-Cadmium battery pack may be weak.
	ring or receive a page.	Charge the battery on the base for 15-20 hours.
		• Be sure the antenna in in a vertical position.
		• The handset may be too far away from the base.
		Place the base away from appliances or metal objects.
		• Place the handset back on the charging cradle for a
		few seconds. The status LED blinks indicating that
		the phone has been reset.

53

Image 55

Contents Page Controls and Functions Contents Welcome FeaturesIncluded in Your Package Selecting a Location Switch to interrupt its powerDESK/TABLETOP Installation Standard wall plate mounting Wall InstallationDirect wall mounting Installing the Handset Battery Pack Pull the cover of battery charger Charging the Battery PackInitial battery charging Charging optional battery packsSetting the PULSE/TONE Switch Cleaning the Battery ContactsLow battery indicator Adjusting the Volume Controls Pull both side of the tabs from the holes Installing the BeltclipTo attach the beltclip To remove the beltclipWait for 5 seconds Headset InstallationTo reset the digital security code Automatic Digital Code SecurityBasic 2-line operation Making and Receiving CallsAnswering a Call from the Base When you finish the call, press line 1 to hang upPick up the handset Press line Dialing from Talk ModeMaking a Call from the Handset Handset rings and the following Screen appearsDialing from Standby Mode Using the Tone FeatureFlash and Call Waiting Placing a Call on Hold Using RedialTo redial from the handset Using the page Feature Using the Mute FeatureHandset beeps for 60 seconds Following screen appears Extension In Use Line OperationWAY Conferencing Press call id/hold From the Base to the Handset Using Your EXS 9995 IntercomPress page/int’com on the base From Handset to Base Transferring a CallOn the handset, Press line 1 to talk Traveling OUT-OF-RANGEOn the Handset Storing a Phone Number in MemoryWhen you have finished entering a name, press select Editing a Phone Number in Memory Store Number After erasing a number, you may add a new address to memory Erasing a Number from MemoryFrom the Handset Page Standby Mode Dialing from the Handset Using Memory DialingPress line 1. The number dials Number dials Talk Mode Dialing from the HandsetTurning AutoTalk and Caller ID/Call Waiting On or Off Using Caller IDSetting up Caller ID options To change your Caller ID optionsScreening Your Calls Programming Your Area CodeReviewing Caller ID name/numbers Line Select. The following screen appears Storing a Caller ID number in a memory locationTo delete a single Caller ID message, follow the steps below Deleting a Caller ID messagePress del/conf to delete name/numbers Deleting all Caller ID name/numbersUsing Cidcw Caller ID with Call Waiting Turning the answering system on/off Setting UP Your Answering SystemPress and hold clock until a tone sounds Prerecorded Greeting Setting Your GreetingRecording your Personal/User Greeting Press greeting to play the current greeting Choosing between Prerecorded and User GreetingsSelecting a PIN Code Announce only featureLine 1 and line 2 must use the same PIN code Ring time switch is common for line 1 and line Setting Ring Rime SwitchPlaying your messages Using Your Answering SystemSkipping a Message Repeating a MessagePress skip at any time to skip to the next message Deleting all messages Deleting a MessageVoice Memo Deleting individual messageTo stop the recording, press voice memo or play/stop Recording a ConversationRemote Access Away from Home Remote Rome Monitor Quick Reference Chart Call-in features Adjust the speaker volume on the baseMake sure you are using the correct PIN code Call-in features fromMemo Memo At Uniden, we’ll take care of you