Uniden EXS 9960 manual DC in 9V jack

Page 11

Mounting the base unit on a wall

Standard wall plate mounting

This phone can be mounted on any standard telephone wall plate.

1

2 - 7

 

1

Snap the wall mount

 

 

adapter into the

 

 

notches on the base.

 

2

Plug the telephone

 

 

line cord to the

 

 

TEL LINE jack and the

 

 

AC adapter to the

 

 

DC IN 9V jack.

 

3

Plug the telephone

 

 

line cord into the

 

 

telephone outlet.

 

4

Wrap the AC adapter

 

 

cord inside the

6

 

molded wiring

2

channel. Then wrap

 

the cord around the strain relief notch.

4

Wall plate

7

3

7

5

AC adapter

AC outlet

5 Plug the AC adapter into a standard

120V AC wall outlet.

6 Raise the antenna to a vertical position.

7 Align the mounting slots on the base. with the mounting posts on the wall. Push in and down until the phone is firmly seated.

8

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Page Introduction FeaturesTalk Flash Controls and functions29 30 Contents About the digital security code Read this first5 to 10 to11Checking the package contents Choose the best location Setting up the base unitConnect the base unit If you want to install the base unit on the wall, seeIf you arent sure of your dialing system Choose the dialing modeIf your dialing system is Set the switch to Tone PulseDC in 9V jack Direct wall plate mounting Preparing the battery pack Cleaning the battery contacts Charging optional battery packsBattery use time per charge When the battery charge becomes lowOther Operations Making a callOn-hook dialing Example1003 Off-hook dialingTalk High Talk 017Call Waiting AutoTalk when ringingAny key answer when ringing Receiving a callRinger High Adjusting the ringer and earpiece volumeRinger volume Earpiece volumeRedial3 Redialing a callOn-hook redialing Redial2Off-hook redialing Edit Memory07 Delete Memory07 Go Back Storing phone numbers and namesMemory Store Store NameMemory07 Stored Store NumberDisplay a Programmed Number Making calls with memory dialingOn-hook memory dialing Talk 035 Off-hook memory dialingTalk Talk High Memory Store 01 Uniden Corp 02 John DOE Editing a stored name and/or phone numberMemory Store is Memory01 StoredErasing a stored name and phone number Following screen appears PagingHandset beeps for 5 seconds Mute When speaking on the handsetWhen phone is ringing Area Code Setting Caller ID optionsCaller ID Auto TalkOff813-8 3300 When the telephone rings11 1230PM 17 1230PM Uniden Corp Long Distance call setting and cancellationViewing the Caller ID Message list New Total02Deleting a Caller ID message When the pointer is at YesWhen the pointer is at No Deleting information from the Caller ID listTotal00 Deleting all Caller ID name/numbersDelete All ? Yes Dial edit Using the Caller ID listCalling a party from the Caller ID list Long Distance callsSelect Location Storing Caller ID messages in Memory dialingTalk Uniden Corp Using Caller ID on call waiting serviceUnit. Press and hold Changing the digital security codeTo attach the beltclip To remove the beltclip Installing the beltclipHeadset installation Power Failure MaintenanceBattery replacement and handling Symptom Suggestion TroubleshootingHandset SpecificationsGeneral Base unitV, W, X, Y, Z IndexK, L Page
Top Page Image Contents