Uniden EXS 9960 manual Maintenance, Battery replacement and handling, Power Failure

Page 40

Note on power sources

Battery replacement and handling

When the operating time becomes short, even after a battery is recharged, please replace the battery.

With normal usage, your battery should last about one year.

Please contact your place of purchase for a replacement battery.

Power Failure

During the period that the power is off, you will not be able to make or receive calls with the telephone.

RECYCLING NICKEL- CADMIUM BATTERIES

NICKEL-

CADMIUM

BATTERIES

MUST BE

DISPOSED OF

Ni-CdPROPERLY.

Nickel-cadmium cells are used in the battery pack. Please take your used nickel- cadmium battery packs to a store that recycles nickel- cadmium batteries.

Caution

•Use the specified battery pack.

•Do not remove the battery from the handset to charge it.

•Never throw the battery into a fire, disassemble it, or heat it.

•Do not remove or damage the battery casing.

Maintenance

When slightly dirty

Wipe with a soft, dry cloth.

When very dirty

Wipe with a soft cloth that has been dampened with diluted, neutral detergent. Dry with a dry cloth.

When the charging terminals become dirty

Wipe with a pencil eraser or other contact cleaner.

Caution

Do not use paint thinner, benzene, alcohol, or other chemical products. Doing so may discolor the surface of the telephone and damage the finish.

37

Image 40

Contents Page Features IntroductionControls and functions Talk Flash29 30 Contents Read this first 5 to10 to11 About the digital security codeChecking the package contents Setting up the base unit Choose the best locationIf you want to install the base unit on the wall, see Connect the base unitChoose the dialing mode If your dialing system is Set the switch to TonePulse If you arent sure of your dialing systemDC in 9V jack Direct wall plate mounting Preparing the battery pack Charging optional battery packs Battery use time per chargeWhen the battery charge becomes low Cleaning the battery contactsMaking a call On-hook dialingExample Other OperationsOff-hook dialing Talk HighTalk 017 1003AutoTalk when ringing Any key answer when ringingReceiving a call Call WaitingAdjusting the ringer and earpiece volume Ringer volumeEarpiece volume Ringer HighRedialing a call On-hook redialingRedial2 Redial3Off-hook redialing Storing phone numbers and names Memory StoreStore Name Edit Memory07 Delete Memory07 Go BackStore Number Memory07 StoredOn-hook memory dialing Making calls with memory dialingDisplay a Programmed Number Talk Talk High Off-hook memory dialingTalk 035 Editing a stored name and/or phone number Memory Store 01 Uniden Corp 02 John DOEMemory01 Stored Memory Store isErasing a stored name and phone number Handset beeps for 5 seconds PagingFollowing screen appears When phone is ringing When speaking on the handsetMute Setting Caller ID options Caller IDAuto TalkOff Area Code11 1230PM When the telephone rings813-8 3300 Long Distance call setting and cancellation Viewing the Caller ID Message listNew Total02 17 1230PM Uniden CorpWhen the pointer is at Yes When the pointer is at NoDeleting information from the Caller ID list Deleting a Caller ID messageDelete All ? Yes Deleting all Caller ID name/numbersTotal00 Using the Caller ID list Calling a party from the Caller ID listLong Distance calls Dial editStoring Caller ID messages in Memory dialing Select Location Using Caller ID on call waiting service Talk Uniden CorpChanging the digital security code Unit. Press and holdHeadset installation Installing the beltclipTo attach the beltclip To remove the beltclip Battery replacement and handling MaintenancePower Failure Troubleshooting Symptom SuggestionSpecifications GeneralBase unit HandsetK, L IndexV, W, X, Y, Z Page