Uniden EXS 9960 manual Direct wall plate mounting

Page 12

If the handset beltclip is attached, you cannot charge the handset facing forward when the phone is mounted on the wall. (See page 36.)

Handset retainer

SDIGITA

PR L

SPECTRAMAD

900MHz

8 On the base unit, pull the handset retainer out of the slot. Rotate it clockwise 180 degrees.

9 Flip the retainer from front to back. Slide it back into the slot so that the lip of the retainer is up and the oval is down. The retainer holds the handset

in place.

Direct wall plate mounting

If you don't have a standard wall plate, you can mount your phone directly to the wall. Before doing this, consider the following:

•Avoid electrical cables, pipes, or other items behind the mounting location, that could cause a hazard when inserting screws into the wall.

•Try to mount your phone within 10 - 15 feet of a working phone jack to avoid excessive cord lengths.

•Make sure the wall material is capable of supporting the weight of the base and handset.

•Use #10 screws with anchoring devices suitable for the wall material where the base unit will be placed.

TOP								1 Insert two mounting screws
							3/16 in.	1 Insert two mounting screws
							3/16 in.	into the wall, (with their
								into the wall, (with their
								appropriate anchoring device),
								appropriate anchoring device),
								3-15/16 inches apart. Allow
								about 3/16 of an inch between
							3-15/16 in.	the wall and screwheads for
								mounting the phone.
								2 Refer to steps 1 through 9 on
								page 8 and 9 to mount the
								telephone.

9

Image 12

Contents Page Features IntroductionControls and functions Talk Flash29 30 Contents Read this first 5 to10 to11 About the digital security codeChecking the package contents Setting up the base unit Choose the best locationIf you want to install the base unit on the wall, see Connect the base unitChoose the dialing mode If your dialing system is Set the switch to TonePulse If you arent sure of your dialing systemDC in 9V jack Direct wall plate mounting Preparing the battery pack Charging optional battery packs Battery use time per chargeWhen the battery charge becomes low Cleaning the battery contactsMaking a call On-hook dialingExample Other OperationsOff-hook dialing Talk HighTalk 017 1003AutoTalk when ringing Any key answer when ringingReceiving a call Call WaitingAdjusting the ringer and earpiece volume Ringer volumeEarpiece volume Ringer HighRedialing a call On-hook redialingRedial2 Redial3Off-hook redialing Storing phone numbers and names Memory StoreStore Name Edit Memory07 Delete Memory07 Go BackStore Number Memory07 StoredMaking calls with memory dialing On-hook memory dialingDisplay a Programmed Number Off-hook memory dialing Talk Talk HighTalk 035 Editing a stored name and/or phone number Memory Store 01 Uniden Corp 02 John DOEMemory01 Stored Memory Store isErasing a stored name and phone number Paging Handset beeps for 5 secondsFollowing screen appears When speaking on the handset When phone is ringingMute Setting Caller ID options Caller IDAuto TalkOff Area CodeWhen the telephone rings 11 1230PM813-8 3300 Long Distance call setting and cancellation Viewing the Caller ID Message listNew Total02 17 1230PM Uniden CorpWhen the pointer is at Yes When the pointer is at NoDeleting information from the Caller ID list Deleting a Caller ID messageDeleting all Caller ID name/numbers Delete All ? YesTotal00 Using the Caller ID list Calling a party from the Caller ID listLong Distance calls Dial editStoring Caller ID messages in Memory dialing Select LocationUsing Caller ID on call waiting service Talk Uniden CorpChanging the digital security code Unit. Press and holdInstalling the beltclip Headset installationTo attach the beltclip To remove the beltclip Maintenance Battery replacement and handlingPower Failure Troubleshooting Symptom SuggestionSpecifications GeneralBase unit HandsetIndex K, LV, W, X, Y, Z Page