Uniden EXS 9960 manual Charging optional battery packs, Battery use time per charge

Page 14
Low Battery

Charging optional battery packs

The base unit of your phone is equipped with a compartment for charging an extra battery pack for use in your handset.

Please visit your authorized Uniden dealer to obtain an extra battery pack or contact the Uniden parts department at (800) 554 - 3988. Hours are from 8:30 a.m. to 5:00 p.m. Central time, Monday through Friday.

1.Pull the cover of battery charger.

2.Put the battery pack in the compartment with contacts facing down.

3.Replace the charger cover.

4.Charge the battery for more than 28 hours.

open

status

backup

battery

 

 

 

power

 

 

page/find

Hz

status

power

page/find

Even when the battery pack is not being used, it will gradually discharge over a long period. For optimum performance, be sure to return the handset to the base unit after a telephone call for charging the battery.

Rechargeable batteries have a memory effect that reduces standby and talk time. To avoid this memory effect, on a monthly basis, use the phone until the “Low Battery” appears. Then charge the battery for more than 17 hours.

In the event of a power failure, your spare battery pack can be used as a back-up power supply for the base unit.

Battery use time (per charge)

From fully charged

Four hours coutinuous use.

Seven days when the handset is in the standby mode.

When the battery charge becomes low

When the voltage of battery pack in the handset is very low and needs to be charged, the phone is programmed to eliminate

functions in order to save power. If the phone is not in use,

Low Battery” flashes and none of the keys will operate. If the phone is in use, “Low Battery” flashes and the handset beeps. Complete your conversation as quickly as possible and return the handset to the base unit for charging.

Cleaning the battery contacts

To maintain a good charge, it is important to clean the battery contacts on the handset and base unit about once a month. Use a pencil eraser or other contact cleaner.

Do not use any liquids or solvents.

11

Image 14
Contents Page Features IntroductionControls and functions Talk Flash29 30 Contents 10 to11 Read this first5 to About the digital security codeChecking the package contents Setting up the base unit Choose the best locationIf you want to install the base unit on the wall, see Connect the base unitPulse Choose the dialing modeIf your dialing system is Set the switch to Tone If you arent sure of your dialing systemDC in 9V jack Direct wall plate mounting Preparing the battery pack When the battery charge becomes low Charging optional battery packsBattery use time per charge Cleaning the battery contactsExample Making a callOn-hook dialing Other OperationsTalk 017 Off-hook dialingTalk High 1003Receiving a call AutoTalk when ringingAny key answer when ringing Call WaitingEarpiece volume Adjusting the ringer and earpiece volumeRinger volume Ringer HighRedial2 Redialing a callOn-hook redialing Redial3Off-hook redialing Store Name Storing phone numbers and namesMemory Store Edit Memory07 Delete Memory07 Go BackStore Number Memory07 StoredDisplay a Programmed Number Making calls with memory dialingOn-hook memory dialing Talk 035 Off-hook memory dialingTalk Talk High Editing a stored name and/or phone number Memory Store 01 Uniden Corp 02 John DOEMemory01 Stored Memory Store isErasing a stored name and phone number Following screen appears PagingHandset beeps for 5 seconds Mute When speaking on the handsetWhen phone is ringing Auto TalkOff Setting Caller ID optionsCaller ID Area Code813-8 3300 When the telephone rings11 1230PM New Total02 Long Distance call setting and cancellationViewing the Caller ID Message list 17 1230PM Uniden CorpDeleting information from the Caller ID list When the pointer is at YesWhen the pointer is at No Deleting a Caller ID messageTotal00 Deleting all Caller ID name/numbersDelete All ? Yes Long Distance calls Using the Caller ID listCalling a party from the Caller ID list Dial editStoring Caller ID messages in Memory dialing Select LocationUsing Caller ID on call waiting service Talk Uniden CorpChanging the digital security code Unit. Press and holdTo attach the beltclip To remove the beltclip Installing the beltclipHeadset installation Power Failure MaintenanceBattery replacement and handling Troubleshooting Symptom SuggestionBase unit SpecificationsGeneral HandsetV, W, X, Y, Z IndexK, L Page