If the handset battery pack is completely discharged or the battery pack is removed, the digital security code will be lost. If this happens, a new
Changing the digital security code
The digital security code is an identification code used to connect the handset and the base unit. Normally, setting the code is not necessary.
The first time you charge your handset, the security code is automatically set. (See page 3.)
In the rare situation that you suspect another cordless telephone is using the same security code, you can change the code.
1 Remove the handset from the base
DIGI | unit. Press and hold | page/find . |
SPR TAL | ||
SPECTRAM | ||
AD |
|
|
security code is set automatically next time the battery pack is charged.
ADDITIONALINFORMATION 35
900MHz
status
backupopen | power |
battery | |
| page/find |
2 While the handset is producing the paging sound, hold page/find and replace the handset on the base unit. The paging tone stops.
Leave the handset on the base longer than 5 seconds. A random, new security code is set.