Uniden EXS 9960 manual Setting up the base unit, Choose the best location

Page 8

Setting up the base unit

Do the following steps.

•Choose the best location

•Connect the base unit

•Choose the dialing mode

Choose the best location

Before choosing a location for your new phone, read the INSTALLATION CONSIDERATIONS included in the PRECAUTIONS AND IMPORTANT SAFETY INSTRUCTIONS brochure. Here are some important guidelines you should consider:

Avoid heat sources, such as radiators, air ducts, and sunlight

Avoid television sets and other electronic equipment

Choose a central location

Avoid noise sources such as a window by a street with heavy traffic

Avoid microwave ovens

Avoid excessive moisture, extremely low temperatures, dust, mechanical vibration, or shock

Avoid personal computers

Avoid other cordless telephones

•You should charge your handset for more than 17 hours before using the phone.

•The location should be close to both a phone jack and a continuous power outlet which is not switchable.

•Keep the base and handset away from sources of electrical noise such as motors and fluorescent lighting.

•Be sure there is sufficient space to raise the base antenna fully vertical.

•The base can be placed on a desk, tabletop or mounted on a standard wall plate.

5

Image 8

Contents Page Features IntroductionControls and functions Talk Flash29 30 Contents Read this first 5 to10 to11 About the digital security codeChecking the package contents Setting up the base unit Choose the best locationIf you want to install the base unit on the wall, see Connect the base unitChoose the dialing mode If your dialing system is Set the switch to TonePulse If you arent sure of your dialing systemDC in 9V jack Direct wall plate mounting Preparing the battery pack Charging optional battery packs Battery use time per chargeWhen the battery charge becomes low Cleaning the battery contactsMaking a call On-hook dialingExample Other OperationsOff-hook dialing Talk HighTalk 017 1003AutoTalk when ringing Any key answer when ringingReceiving a call Call WaitingAdjusting the ringer and earpiece volume Ringer volumeEarpiece volume Ringer HighRedialing a call On-hook redialingRedial2 Redial3Off-hook redialing Storing phone numbers and names Memory StoreStore Name Edit Memory07 Delete Memory07 Go BackStore Number Memory07 StoredDisplay a Programmed Number Making calls with memory dialingOn-hook memory dialing Talk 035 Off-hook memory dialingTalk Talk High Editing a stored name and/or phone number Memory Store 01 Uniden Corp 02 John DOEMemory01 Stored Memory Store isErasing a stored name and phone number Following screen appears PagingHandset beeps for 5 seconds Mute When speaking on the handsetWhen phone is ringing Setting Caller ID options Caller IDAuto TalkOff Area Code813-8 3300 When the telephone rings11 1230PM Long Distance call setting and cancellation Viewing the Caller ID Message listNew Total02 17 1230PM Uniden CorpWhen the pointer is at Yes When the pointer is at NoDeleting information from the Caller ID list Deleting a Caller ID messageTotal00 Deleting all Caller ID name/numbersDelete All ? Yes Using the Caller ID list Calling a party from the Caller ID listLong Distance calls Dial editStoring Caller ID messages in Memory dialing Select LocationUsing Caller ID on call waiting service Talk Uniden CorpChanging the digital security code Unit. Press and holdTo attach the beltclip To remove the beltclip Installing the beltclipHeadset installation Power Failure MaintenanceBattery replacement and handling Troubleshooting Symptom SuggestionSpecifications GeneralBase unit HandsetV, W, X, Y, Z IndexK, L Page