Uniden ANA 9710 manual Radio Interference, More Than One Cordless Telephone, Privacy

Page 12

Radio Interference

Radio interference may occasionally cause buzzing and humming in your cordless Handset, or clicking noises in the Base Unit. This interference is caused by external sources such as a TV, refrigerator, vacuum cleaner, fluorescent lighting, computer equipment, or electrical storm. Your unit is NOT DEFECTIVE. If these noises continue and are too distracting, please check around your office to see what appliances may be causing the problem. In addition, we recommend that the Base not be plugged into a circuit that also powers a major appliance because of the potential for interference. Be certain that the antenna on the unit is fully extended when needed.

In the unlikely event that you consistently hear other voices or distracting transmissions on your phone, you may be receiving radio signals from another cordless telephone or another source of interference. If you cannot eliminate this type of interference, you need to change to a different channel.

Finally, it should be noted that some cordless telephones operate at frequencies that may cause interference to nearby TVs and VCRs. To minimize or prevent such interference, the base of the cordless telephone should not be placed near or on top of a TV or VCR. If interference is experienced, moving the cordless telephone farther away from the TV or VCR will often reduce or eliminate the interference.

More Than One Cordless Telephone

If you want to use more than one cordless telephone in your office, they must operate on different channels. Press the channel key to select a channel that provides the clearest communication.

Privacy

Note: Cordless phones are radio devices. Communications between the Handset and Base Unit of your cordless telephone are accomplished by means of radio waves which are broadcasted over the open airways. Because of the inherent physical properties of radio waves, your communications can be received by radio receiving devices other than your own cordless telephone unit. Consequently, any communications using your cordless telephone may not be private.

6

Image 12
Contents ANA One Year Limited Warranty Covered under one or more of the following U.S. patents Precautions Handset Controls & Functions Base Unit Controls & Functions Table of Contents Important Safety Instructions Page About Your ANA Telephone Line Problems Important Electrical ConsiderationsRange Radio Interference More Than One Cordless TelephonePrivacy ANA 9710 Features Installing Your ANA Selecting the Installation LocationConnecting the Telephone Line Hardwired JackConnecting the Telephone Cords Tone/Pulse Switch Applying Power to the Base and Charger UnitsPage Wall Installation Standard Wall Plate MountingDirect Wall Mounting Page Charging Unit Wall Mounting Page Attaching the Beltclip to the Handset Installing the Handset Battery Pack Charging the Handset Battery Pack Charging Spare Battery Packs Low Battery IndicatorUsing Your ANA 9710 Handset Cleaning the Battery and Charging Unit ContactsANA 9710 Handset Controls Earpiece Volume Handset Ringer tone and volume Vibrate ModeHandset Ringer Switch Using the Handset Answering a Call Making a CallFeature Buttons Connecting a Conference CallPlacing a call on hold Transferring a CallProgramming the Feature Buttons Function Keys HoldUsing Your ANA 9710 Memory Storing a NumberErasing a Stored Number Example Store 555-1234 in memory locationDialing with a Stored Number Memory SearchChain Dialing Using Your ANA 9710 Base Unit Using the HoldUsing the Page/Find Optional Headset EXP9530 Using an Optional Second 2500-type Analog Telephone Connecting the Desk TelephoneTransferring a Call to the ANA Transferring a Call to the Desk TelephoneTypical Applications Optional Accessories and Replacement Parts Troubleshooting Problem SuggestionSpecifications Base UnitHandset Memo