Wall Installation
Standard Wall Plate Mounting
This Phone is designed to be mounted on a standard AT&T or GTE wall plate. To attach the wall mount stand to the Base Unit:
1. Slide the Wall Mount stand into the notches at the top of the Base Unit, push the Wall Mount stand down and snap it into place.
2.Plug the AC Adapter into the Base Unit as previously described.
3.Place the AC Adapter cord inside the molded channel of
the Wall Mount stand.
4.Plug one end of the short telephone cord into the LINE jack on the Base Unit. Optionally, plug one end of a standard 2500 type desk phone into the PHONE jack. Then place the telephone cord(s) inside the molded channel(s) on the bottom of the Wall Mount stand.
5.Plug the other end of the short telephone cord into the modular wall jack.
12