Uniden ANA 9710 manual Charging Spare Battery Packs, Low Battery Indicator

Page 26

Charging Spare Battery Packs

The Charger Unit of your ANA 9710 is equipped to charge the Spare Battery Pack with or without the Handset in the front slot.

1.Slide the Spare Battery Pack into the second slot in the Charging Unit until the retaining clip snaps over the top of the pack.

2.Make sure the BATT

CHARGE indicator lights. If the BATT CHARGE indicator doesn’t light, check to see that the AC Adapter is plugged in, and that the Battery Pack is making good contact with the Charging Unit charging contacts.

Note: Charge the Battery Pack without interruption for 12-15 hours.

3.When charging is complete, press out on the latch and remove the Battery Pack for use. Or, if you don’t need the Battery pack immediately, leave it in the Charging Compartment; it will not overcharge.

Low Battery Indicator

When the Battery Pack in the Handset is low and needs to be charged, you will see a message on the display.

On a Call	In Standby Mode


All keys and functions are available.	None of the buttons operate.

Handset beeps once every 3 seconds	Handset beeps every 15 seconds for 3
	minutes.

Complete your call as quickly as	Cannot make or receive a call.
possible

Replace Battery pack within 20	Replace Battery Pack before making a
seconds to continue call.	call.

Return the Handset to the Charging Unit for charging or replace the Handset Battery Pack with another charged Battery Pack.

20

Image 26

Contents ANA One Year Limited Warranty Covered under one or more of the following U.S. patents Precautions Handset Controls & Functions Base Unit Controls & Functions Table of Contents Important Safety Instructions Page About Your ANA Range Telephone Line ProblemsImportant Electrical Considerations Privacy Radio InterferenceMore Than One Cordless Telephone ANA 9710 Features Connecting the Telephone Line Installing Your ANASelecting the Installation Location Hardwired JackConnecting the Telephone Cords Tone/Pulse Switch Applying Power to the Base and Charger UnitsPage Wall Installation Standard Wall Plate MountingDirect Wall Mounting Page Charging Unit Wall Mounting Page Attaching the Beltclip to the Handset Installing the Handset Battery Pack Charging the Handset Battery Pack Charging Spare Battery Packs Low Battery IndicatorUsing Your ANA 9710 Handset Cleaning the Battery and Charging Unit ContactsANA 9710 Handset Controls Earpiece Volume Handset Ringer Switch Handset Ringer tone and volumeVibrate Mode Using the Handset Answering a Call Making a CallPlacing a call on hold Feature ButtonsConnecting a Conference Call Transferring a CallProgramming the Feature Buttons Function Keys HoldUsing Your ANA 9710 Memory Storing a NumberErasing a Stored Number Example Store 555-1234 in memory locationDialing with a Stored Number Memory SearchChain Dialing Using the Page/Find Using Your ANA 9710 Base UnitUsing the Hold Optional Headset EXP9530 Transferring a Call to the ANA Using an Optional Second 2500-type Analog TelephoneConnecting the Desk Telephone Transferring a Call to the Desk TelephoneTypical Applications Optional Accessories and Replacement Parts Troubleshooting Problem SuggestionHandset SpecificationsBase Unit Memo