Uniden manual Using Your ANA 9710 Base Unit, Using the Hold, Using the Page/Find

Page 39

Using Your ANA 9710 Base Unit

Although most of the ANA 9710 operations are performed at the Handset, there are two operations performed at the Base Unit.

The power/status LED (2) blinks whenever the Handset is connected to a call.

1. Hold Button

2. Power/Status LED

3. Page/Find Button

Using the Hold

The hold button (1) is used in conjunction with a desk top phone to switch from the Handset to a desk top phone.

1.If you need to use a desk top phone which the ANA 9710 is connected to, press hold on the Base unit then pick up the desk top phone.

2.To resume using the Handset, press hold on the Base unit, then press talk on the Handset. The Handset resumes functioning as before.

Using the Page/Find

The page/find button (3) is used to locate the Handset. Pressing page/find will send a ring signal to the Handset.

Note: The Handset Ringer must be on and set to Type A, B or C in order for the page/find function to work.

33

Image 39

Contents ANA One Year Limited Warranty Covered under one or more of the following U.S. patents Precautions Handset Controls & Functions Base Unit Controls & Functions Table of Contents Important Safety Instructions Page About Your ANA Telephone Line Problems Important Electrical ConsiderationsRange Radio Interference More Than One Cordless TelephonePrivacy ANA 9710 Features Hardwired Jack Installing Your ANASelecting the Installation Location Connecting the Telephone LineConnecting the Telephone Cords Applying Power to the Base and Charger Units Tone/Pulse SwitchPage Standard Wall Plate Mounting Wall InstallationDirect Wall Mounting Page Charging Unit Wall Mounting Page Attaching the Beltclip to the Handset Installing the Handset Battery Pack Charging the Handset Battery Pack Low Battery Indicator Charging Spare Battery PacksCleaning the Battery and Charging Unit Contacts Using Your ANA 9710 HandsetANA 9710 Handset Controls Earpiece Volume Handset Ringer tone and volume Vibrate ModeHandset Ringer Switch Using the Handset Making a Call Answering a CallTransferring a Call Feature ButtonsConnecting a Conference Call Placing a call on holdProgramming the Feature Buttons Hold Function KeysStoring a Number Using Your ANA 9710 MemoryExample Store 555-1234 in memory location Erasing a Stored NumberMemory Search Dialing with a Stored NumberChain Dialing Using Your ANA 9710 Base Unit Using the HoldUsing the Page/Find Optional Headset EXP9530 Transferring a Call to the Desk Telephone Using an Optional Second 2500-type Analog TelephoneConnecting the Desk Telephone Transferring a Call to the ANATypical Applications Optional Accessories and Replacement Parts Problem Suggestion TroubleshootingSpecifications Base UnitHandset Memo