Uniden ANA 9710 manual

Page 20

1. Insert two mounting screws into the wall 3-15/16 inches apart. Allow about 3/16 of an inch between the wall and screw heads for mounting the phone.

2.Plug and secure the AC Adapter cord by following steps 2 and 3 of the Standard Wall Plate Mounting.

3.Plug one end of the telephone line cord into the LINE jack on

the Base Unit. Optionally, plug one end of a standard 2500 type desk phone into the PHONE jack. Then place the telephone cord(s) inside the molded channel(s) on the bottom of the Wall Mount stand.

4.Place the Base Unit on the posts of the wall screws and push down until it is firmly

seated.

14

Image 20

Contents ANA One Year Limited Warranty Covered under one or more of the following U.S. patents Precautions Handset Controls & Functions Base Unit Controls & Functions Table of Contents Important Safety Instructions Page About Your ANA Range Telephone Line ProblemsImportant Electrical Considerations Privacy Radio InterferenceMore Than One Cordless Telephone ANA 9710 Features Installing Your ANA Selecting the Installation LocationConnecting the Telephone Line Hardwired JackConnecting the Telephone Cords Tone/Pulse Switch Applying Power to the Base and Charger UnitsPage Wall Installation Standard Wall Plate MountingDirect Wall Mounting Page Charging Unit Wall Mounting Page Attaching the Beltclip to the Handset Installing the Handset Battery Pack Charging the Handset Battery Pack Charging Spare Battery Packs Low Battery IndicatorUsing Your ANA 9710 Handset Cleaning the Battery and Charging Unit ContactsANA 9710 Handset Controls Earpiece Volume Handset Ringer Switch Handset Ringer tone and volumeVibrate Mode Using the Handset Answering a Call Making a CallFeature Buttons Connecting a Conference CallPlacing a call on hold Transferring a CallProgramming the Feature Buttons Function Keys HoldUsing Your ANA 9710 Memory Storing a NumberErasing a Stored Number Example Store 555-1234 in memory locationDialing with a Stored Number Memory SearchChain Dialing Using the Page/Find Using Your ANA 9710 Base UnitUsing the Hold Optional Headset EXP9530 Using an Optional Second 2500-type Analog Telephone Connecting the Desk TelephoneTransferring a Call to the ANA Transferring a Call to the Desk TelephoneTypical Applications Optional Accessories and Replacement Parts Troubleshooting Problem SuggestionHandset SpecificationsBase Unit Memo