Installing into a Universal Bracket Mount in an Alternative Location (to the floor under a seat or below a package tray)
If installation of the DVD player in an
1Determine if you will be floor mounting the unit, or mount- ing it under a panel. Attach the brackets in the appropriate direction. Use
2Position the unit in place, and secure it with hexagon
CAUTION!
Do not overtighten the screws on uneven sur- faces! This can cause dam- age to the VS735. If an even mounting surface cannot be found, fabricate a flat panel, mount the VS735 to it, and mount that panel to the ve- hicle.
WARNING!
Always use great care when attaching anything to a vehicle! Visually inspect all sides of any potential screw location, to insure no damage will occur. If you have ques- tions about this process, see your authorized Clarion dealer.
5. Wiring the VS735
The following pages display wiring diagrams for various VS735 configurations.
Read the following precautions before wiring your system.
•Disconnect the negative battery terminal before making any wiring connections.
•Be particularly careful where you route wires. Keep them away from the engine, exhaust system, etc. Heat may damage wires.
•If the fuse should blow, make sure all connections are correct and no wires are damaged before replacing the fuse. Always use fuses that are the same amperage value as the original. When replacing a fuse, never let the battery side touch any metal part or any other wire.