Clarion VS735 specifications During use

The [POWER] button turns the VS735 on and off. When the ignition switch is in the ACC or RUN positions, this button is illuminated red. The [POWER] button on the remote can also be used.

The IR Receiver detects the signals from the included infrared remote control. Aim the remote control at the IR receiver

Reset button
Disc loading	Security
slot	LED

DCP release button

(on back of DCP)

Eject button

during use.

		Function			Playback Control Status
Media Type		status indicators
Play/Pause
DVD	SCN	REPEAT 1	A -	B	REMAIN	DOLBY
	RDM	TITLE	CHP	TRK	ANGLE	DIGITAL
VCD						PBC
CD
MP3	L / R
Disc	Disc Loaded		Alphanumeric display
Status	Mono Audio

Indicator

The front-panel display provides basic information about the status of the VS735. Please note that much information about using the VS735 will be displayed on the video screen connected to the unit, and initial setup of the VS735 cannot be completed without an operating video monitor providing this on-screen display of menus and settings. Whenever the term “on-screen display” is used, it refers to the video monitor display, not the front panel display.

6VS735

(on back of DCP)

Once the face is lowered, insert discs by placing them into the disc loading slot.

The [ ] eject button is located on the back of the detachable control panel (DCP), not on the front panel. It is backlit green whenever the key is in the ACC or RUN positions. It ejects discs from the disc loading slot.

The Security LED flashes red when the Detachable Control Panel is removed.

The Reset button can be used to reset the internal micropro- cessor. See “Troubleshooting”, in Section 10, for more

information.