Clarion VS735 specifications Changing the Aspect Ratio Mode, Changing the Video Output Mode

Changing the Aspect Ratio Mode

To change the aspect ratio mode, select GENERAL, and then select TV DISPLAY. For widescreen (16:9) monitors, select WIDE. For standard monitors and letterbox viewing (black bars on the top and bottom of the screen, but the entire image preserved), select NORMAL/LB. For standard 4:3 monitors and a full-screen image, but with the edges variably cropped to fit (“pan-and-scan” mode), select NORMAL/PS.

- - GENERAL PAGE - -

TV DISPLAY NORMAL/PS

Changing the Video Output Mode

To change the video output mode, select GENERAL, and then select TV TYPE. The default is MULTI. If you experience problems playing a PAL disc on your NTSC monitors, select NTSC. If you are using European-spec PAL monitors exclu- sively, select PAL.

- - GENERAL PAGE - -

TV DISPLAY

TV TYPE MULTI

PIC MODE	NTSC
ANGLE MARK	PAL

TV TYPE

PIC MODE

ANGLE MARK

OSD LANG

CAPTIONS

NORMAL/LB

WIDE

OSD LANG

MAIN PAGE

MAIN PAGE

4:3 16:9

“Normal” TV screen	Wide TV screen
(Often called “fullscreen”)	(Used by many DVDs)

30VS735

Note:

•The default “MULTI” will automatically output NTSC video from NTSC discs, and PAL video from PAL discs. Many video monitors can automatically handle either type of video signal. NTSC is the North American standard, and the only type of disc many North American users will encounter.