Panasonic WX-T3020 operating instructions Operating Procedures, Communications with Customers Talk

Page 10

Operating Procedures

■Communications with Customers (TALK)

Any store personnel wearing the headset can communicate bidirectionally with any customer who is at the menu board.

1.Select a proper sound level by pressing the button

or .

+VOL –

2.You will hear a beep in the headset when a vehicle arrives at the menu board.

<When the Press-To-Talk (PTT) mode is pre- set>

1.Hold down the T1 button and speak to the customer. A short beep is heard in the headset.

■Communications with Other Store Personnel (PAGE)

Store personnel wearing the headset can communicate with each other without being heard by customers.

<When the Press-To-Page (PTP) mode is pre- set>

1.Hold down the P button and speak into the microphone of the headset at a normal level.

Hold down

2.Release the button. Your voice will not be heard by the other store personnel.

Hold down

2.Release the button. Your voice is not heard by the cus- tomer.

Release

<When the Talk-Lock mode is preset>

1.Press the T1 button and speak to the customer. A short beep is heard in the headset.

Press

2.Press the button again. The lock is released, and your voice is not heard by the customer.

Press again

Release

<When the Page-Lock mode is preset>

1.Press the P button and speak into the microphone of the headset at a normal level.

Press

2.Press the P button again. The lock will be released, and your voice will not be heard by the other store person- nel.

Press again

Note: A maximum of 4 operators can have a conversation at the same time.

10

Image 10

Contents Operating Instructions Federal Communications Commission Interference Statement Disclaimer of Warranty Limitation of LiabilityImportant Safety Instructions Contents Precautions FeaturesPreface Major Operating Controls and Their Functions R e wLane Indicator Battery Lock EjectPower Indicator Volume Control Buttons + VOLReplacement Battery Loading & ReplacementConnecting and Disconnecting the Headset Plug LoadingCommunications with Customers Talk Operating ProceduresCommunications with Other Store Personnel Control of the device control ter- minals Double-Drive-Thru connectionsCanceling the Manager Mode Manager Mode Only one HeadsetAuto-Talk-Lock setup for only one Headset Opening the Switch Compartment Setup ProceduresDIP Switch Setup ID Registration Deletion of IDTroubleshooting SymptomSpecifications Standard Accessory Optional AccessoriesVersion Française Limitation de responsabilité Déni de la garantieInstructions de sécurité importantes Table DES Matières Caractéristiques dominantes PréfaceMesures de précaution Principaux organes de commande et fonctions 4Batterie accessoire optionnel Boutons de réglage de volume + VOL0Bouton dalimentation Power Verrouillage de la batterie EjectChargement Chargement et remplacement de la batterieRemplacement RemarquesCommunications avec les Clients Talk Modes dutilisationCommunication avec dautres membres du personnel du Magasin Bornes de commande de Périphérique extérieur Double-Drive-ThruMode de gérant seulement un Combiné microcasque découte Annulation du mode gérantPage Configuration dinterrupteur DIP Procédures de configurationOuverture du logement de Commutateur Enregistrement didentification Suppression dune identificationDépannage SymptômeCaractéristiques techniques Accessoire standard Accessoires optionnelsPanasonic Canada Inc Panasonic System Solutions CompanyPanasonic Sales Company