■Manager Mode (Only one Headset)
Complete ID Registration to do this setting.
The Order Taker set to the Manager mode has following functionality.
•The manager can interrupt store personnel's TALK or PAGE at any time by monopolizing one channel by prior- ity.
•The Manager hears audio from POS alone.
1.Hold down the power button for 2 seconds or more to turn off the Order Taker.
Hold down the power button for two seconds or more to turn off.
2.While holding R and T1 simultaneously, press the power button to turn on the Order Taker. The Order Taker enters manager setting mode where the indicators and buttons have different functions than in normal opera- tion. You can hear "Connecting center module A" and power indicator is an alternate blinking of red and green. Also the Lane indicator A is blinking yellow.
Keep holding down. (Lane A)
Keep holding down. (Lane B)
When you want to register the manager in another cen- ter module in a
3.If manager mode setting is successful, you can hear "Manager" and the power indicator blinks green.
■Canceling the Manager Mode
1.Hold down the power button for 2 seconds or more to turn off the Order Taker.
2.When LANE A is set in the manager mode, keep press- ing the R and T1 buttons simultaneously and start up the power of Order Taker.
When LANE B is set in the manager mode, keep press- ing the R and T2 buttons simultaneously and start up the power of Order Taker.
The power indicator then blinks reciprocally in red and green. A message of “Connecting Center Module A (or B)” is heard from the Order Taker speaker.
Keep holding down. (Lane A)
Keep holding down. (Lane B)
3.When canceling of the manager mode is complete, reci- procal blinking of the power indicator turns to continu- ous lighting in green.
12