Panasonic AJ-HD1200A BLK Clip, CC F1 Blank, CC F2 Blank, VO Setup HD, ADD22L, ADD21L, ADD20L

Setup menus

VIDEO

	Item		Setting
							Description of settings
No.	Superimposed	No.	Superimposed
	display		display
628	U/C ENH H			For enhancing the horizontal outlines during up-conversion.
		0000	0dB	0: 0dB
		0001	+1dB	1: +1dB
629	U/C ENH V			For enhancing the vertical outlines during up-conversion.
		0000	0dB	0: 0dB
		0001	+1dB	1: +1dB
630	1080i>HD_OUT			For selecting the HD output signal format during 1080i tape playback or in the
				1080i EE mode.
		0000	1080i	0:	1080i
		0001	720p	1:	720p
				<Notes>
				O This item’s setting cannot be changed while a tape is being recorded or while
					the recording pause mode is established.
				O When 720p is selected as this item’s setting, no signals are output from the DV
					connector. If “1394” is selected as the menu item No.600 [VIDEO IN SEL]
					setting, “HDSDI” is established as the VIDEO IN SEL setting.
632	720p>HD_OUT			For selecting the HD output signal format during 720p tape playback or in the 720p
				EE mode.
		0000	1080i	0:	1080i
		0001	720p	1:	720p
				<Notes>
				O This item’s setting cannot be changed while a tape is being recorded or while
					the recording pause mode is established.
				O When 1080i is selected as this item’s setting, no signals are output from the DV
					connector. If “1394” is selected as the menu item No.600 [VIDEO IN SEL]
					setting, “HDSDI” is established as the VIDEO IN SEL setting.
634	480p>HD_OUT			For selecting the HD output signal format during 480p tape (DVCPRO50P)
				playback.
		0000	1080i	0:	1080i
		0001	720p	1:	720p
636	480i>HD_OUT			For selecting the HD output signal format during 480i tape (DVCPRO50, DVCPRO,
				DV or DVCAM) playback.
		0000	1080i	0:	1080i
		0001	720p	1:	720p
676	BLK CLIP			For setting whether to clip what is below the pedestal level for the Y (luminance)
				signal of VIDEO OUT and SD OUT.
		0000	OFF	0: What is below the pedestal level is not clipped.
		0001	ON	1: What is below the pedestal level is clipped.
680	CC (F1) BLANK			For selecting ON or OFF for the closed caption signal in the first field.
	2DW	0000	BLANK	0: Forced blanking
		0001	THRU	1: No blanking
681	CC (F2) BLANK			For selecting ON or OFF for the closed caption signal in the second field.
	2DW	0000	BLANK	0: Forced blanking
		0001	THRU	1: No blanking
682	VO SETUP (HD)			This selects the composite output signal in HD mode.
	2UP	0000	THRU	0: The signal is output with no setup added.
		0001	ADD22L	1: The signal is output from line 22 with a 7.5% setup added.
		0002	ADD21L	2: The signal is output from line 21 with a 7.5% setup added.
		0003	ADD20L	3: The signal is output from line 20 with a 7.5% setup added.
683	VO SETUP (SD)			This selects the composite output signal in SD mode.
	2DW	0000	THRU	0: The signal is output with no setup added.
		0001	ADD22L	1: The signal is output from line 22 with a 7.5% setup added.
		0002	ADD21L	2: The signal is output from line 21 with a 7.5% setup added.
		0003	ADD20L	3: The signal is output from line 20 with a 7.5% setup added.
<Notes>
2UP: With HD output (HD tape playback or up-converted output)						“	” indicates the factory setting.

2DW: With SD output (SD tape playback or down-converted output)

44