Panasonic AJ-HD1200A operating instructions Menu

Setup menus

AUDIO

	Item		Setting
				Description of settings
No.	Superimposed	No.	Superimposed
	display		display
770	MONITOR MIX			For setting the audio monitor output sound.
				(This functions when the audio monitor selector switch on the front panel is at the
				ST position.)
		0000	STEREO	0: The sound is output in stereo.
		0001	CH1+2	1: Mixed sound is output (to both the left and right connectors).
771	H.PHONE MIX			For setting the headphone output sound.
				(This functions when the audio monitor selector switch on the front panel is at the
				ST position.)
		0000	STEREO	0: The sound is output in stereo.
		0001	CH1+2	1: Mixed sound is output (when a monaural earphone is used).
780	AUD OUT SEL			For setting the sound to be output from the analog audio output connectors.
		0000	LINE	0: All the output connectors are used as the main line output.
				CH1 connector = CH1 sound
				CH2 connector = CH2 sound
				CH3 connector = CH3 sound
				CH4 connector = CH4 sound
		0001	CH1/2	1: The CH1 and CH2 output connectors are used as the main line output, and the
				CH3 and CH4 output connectors are used as the monitor output connectors.
				CH1 connector = CH1 sound
				CH2 connector = CH2 sound
				CH3 connector = Monitor L (CH1, CH2, CH1+CH2) sound
				CH4 connector = Monitor R (CH1, CH2, CH1+CH2) sound
		0002	CH3/4	2: The CH1 and CH2 output connectors are used as the main line output, and the
				CH3 and CH4 output connectors are used as the monitor output connectors.
				CH1 connector = CH3 sound
				CH2 connector = CH4 sound
				CH3 connector = Monitor L (CH3, CH4, CH3+CH4) sound
				CH4 connector = Monitor R (CH3, CH4, CH3+CH4) sound
781	IN IMP SEL			For setting the analog audio input impedance.
		0000	600	0: 600 Ω
		0001	HIGH	1: High impedance
				<Note>
				Regardless of this setting, the impedance is set to 3 kΩ when –60 dB is selected
				as the menu item No.701 to 704 [CH1-4 IN LV] settings.

MENU

	Item		Setting
				Description of settings
No.	Superimposed	No.	Superimposed
	display		display
A02	P.ON LOAD			For setting whether to change the setup menu settings to the user initial settings
				when the power is turned on.
		0000	OFF	0: The settings are not changed.
		0001	ON	1: The settings are changed.

“” indicates the factory setting.

48