Roberts Radio ecologic 6 manual Prune stations DAB, Signal strength display DAB

Page 14

Prune stations - DAB

Some DAB services may stop broadcasting or you may not be able to receive a station. Prune stations will delete the DAB stations from your station list that can no longer be received.

1.Press and hold in the Menu/Info button until "Station order" appears on the display. Press and release the Select button.

2.Press the Tuning Up/Down button until "Prune stations" appears on the display. Press and release the Select button to select.

1

1,2

2

2

Signal strength display - DAB

1. Press and release the Select button to show signal strength on the
lower line of the display.	1,3
	1,3

2.Position your radio and carefully angle the wire aerial for best reception using the signal strength display as a guide. Move your radio around and position to give maximum number of black rectangles on the signal strength display. The clear unﬁ lled rectangle indicates minimum signal level required for satisfactory reception.

3.Press and release the Select button to return to the previous display mode.

13

Image 14

Contents Roberts Contents Dimmer button Alarm button Controls front viewControls rear Using the clock radio for the ﬁrst time Selecting a station DAB Above procedure Presetting stations DAB and FMRepeat this procedure for the remaining presets Number in which you wish to store the chosen stationRecalling a preset Finding new stations DAB Manual tuning DAB Secondary services DABDisplay modes DAB Current station belongsDefault is Dynamic Range Control DRC settings DABPress the Tuning Up/Down button until the display shows DRC OrderAlphanumeric Station order setup DABFavourite stations Active stationSignal strength display DAB Prune stations DABOperating your radio Search tuning FM Manual tuning FM Display modes FM Stereo / Mono setting FM Auto preset stations FM Alarm minute will be highlighted AlarmsSetting an alarm Alarm source will be highlightedDay options as described below Then press the Select button to conﬁ rm the settingWeekends To cancel the alarm To switch the alarm on or off To view set alarm timesAppear on the display SnoozeTo set the snooze time Will show on the displaySleep function Setting the clock manually To return to auto clock set mode Dual mode dimmer backlight Software versionSystem reset Auxiliary input socket To the Auxiliary input socketHeadphone socket General 174.928 239.200MHz Speciﬁcations Circuit featuresHeadphone socket 5mm dia 87.50 108 MHz Aux in socket 5mm diaPage Guarantee Worton Road Isleworth Middlesex Technical Helpline 020 8758 0338 Mon-Fri during ofﬁ ce hours