Roberts Radio ecologic 6 manual Dynamic Range Control DRC settings DAB, Order, Value, Default is

Page 12

Dynamic Range Control (DRC) settings - DAB

The DRC facility can make quieter sounds easier to hear when your radio is used in a noisy environment.

1.	Press the On/Off button to switch on your clock radio.
2.	Press and hold in the Menu/Info button until display shows “Station
	order.”
3.	Press the Tuning Up/Down button until the display shows "DRC
	value".

1

2

4.	Press and release the Select button to enter adjustment mode.
5.	Press the Tuning Up/Down button to select required DRC setting
	(default is 0).

DRC 0 DRC is switched off, Broadcast DRC will be ignored.

DRC 1/2 DRC level is set to 1/2 that sent by broadcaster.

3,5

3,5

DRC 1 DRC is set as sent by broadcaster.

6.Press and release the Select button to conﬁ rm the setting.The display will return to radio mode.

Note: Not all DAB broadcasts are able to use the DRC function. If the broadcast does not support DRC, then the DRC setting in the radio will have no effect.

4,6

11

Image 12

Contents Roberts Contents Dimmer button Alarm button Controls front viewControls rear Using the clock radio for the ﬁrst time Selecting a station DAB Presetting stations DAB and FM Repeat this procedure for the remaining presetsAbove procedure Number in which you wish to store the chosen stationRecalling a preset Finding new stations DAB Manual tuning DAB Secondary services DABDisplay modes DAB Current station belongsDynamic Range Control DRC settings DAB Press the Tuning Up/Down button until the display shows DRCDefault is OrderStation order setup DAB Favourite stationsAlphanumeric Active stationSignal strength display DAB Prune stations DABOperating your radio Search tuning FM Manual tuning FM Display modes FM Stereo / Mono setting FM Auto preset stations FM Alarms Setting an alarmAlarm minute will be highlighted Alarm source will be highlightedThen press the Select button to conﬁ rm the setting WeekendsDay options as described below To cancel the alarm To switch the alarm on or off To view set alarm timesSnooze To set the snooze timeAppear on the display Will show on the displaySleep function Setting the clock manually To return to auto clock set mode Dual mode dimmer backlight Software versionSystem reset Auxiliary input socket To the Auxiliary input socketHeadphone socket General Speciﬁcations Circuit features Headphone socket 5mm dia174.928 239.200MHz 87.50 108 MHz Aux in socket 5mm diaPage Guarantee Worton Road Isleworth Middlesex Technical Helpline 020 8758 0338 Mon-Fri during ofﬁ ce hours