Roberts Radio ecologic 6 manual Auto preset stations FM

Page 19

Auto preset stations - FM

Your clock radio will scan the entire FM band searching for stations. As stations are found, they are stored in your clock radio preset memory locations.

1. Press the On/Off button to switch on your radio.

2. If needed, press the Band button to select the FM band.

3. Press and hold the Menu/Info button until the display shows "Mono override" on the lower line.

4.Press and release the Tuning Up/Down buttons until the display shows "FM Scan".

5. Press the Select button to conﬁ rm the scan.

Note: Some of the FM stations stored may be quite weak as the scan stores stations regardless of their signal strength. Up to ten stations

1

2

3

will be stored. Presets can be modiﬁ ed as needed using the procedure	4	4

described on page 6.

5

If you need any further advice, please call our Technical Helpline on :-

020 8758 0338 (Mon-Fri)

18

Image 19

Contents Roberts Contents Controls front view Dimmer button Alarm buttonControls rear Using the clock radio for the ﬁrst time Selecting a station DAB Number in which you wish to store the chosen station Presetting stations DAB and FMRepeat this procedure for the remaining presets Above procedureRecalling a preset Finding new stations DAB Secondary services DAB Manual tuning DABCurrent station belongs Display modes DABOrder Dynamic Range Control DRC settings DABPress the Tuning Up/Down button until the display shows DRC Default isActive station Station order setup DABFavourite stations AlphanumericPrune stations DAB Signal strength display DABOperating your radio Search tuning FM Manual tuning FM Display modes FM Stereo / Mono setting FM Auto preset stations FM Alarm source will be highlighted AlarmsSetting an alarm Alarm minute will be highlightedWeekends Then press the Select button to conﬁ rm the settingDay options as described below To cancel the alarm To view set alarm times To switch the alarm on or offWill show on the display SnoozeTo set the snooze time Appear on the displaySleep function Setting the clock manually To return to auto clock set mode Software version Dual mode dimmer backlightSystem reset To the Auxiliary input socket Auxiliary input socketHeadphone socket General 87.50 108 MHz Aux in socket 5mm dia Speciﬁcations Circuit featuresHeadphone socket 5mm dia 174.928 239.200MHzPage Guarantee Technical Helpline 020 8758 0338 Mon-Fri during ofﬁ ce hours Worton Road Isleworth Middlesex