Roberts Radio ecologic 6 manual Sleep function

Page 25

Sleep function

Your clock radio can be set to turn off after a preset time has elapsed. The sleep setting can be adjusted between 5 and 60 minutes.

1.To set the desired sleep time, press the Sleep button to enter the sleep setup.

2.Repeatedly press the Sleep button to select the desired sleep time. The sleep setting will increase in 5 minute increments from 5 minutes to 60 minutes. A further press will cause the sleep timer to be set to OFF which will cancel the sleep function. Alternatively the Tuning Up or Down buttons may be used. The press the Select button to confi rm the setting.

3.During countdown period, press Sleep button to view countdown time left.

4.Your radio will switch off after the preset sleep time has elapsed.

5.To cancel the sleep function before the preset time has elapsed, either press the On/Off button to turn the radio off or use the Sleep button to show the "Off" option then press Select button to confi rm.

1,2,3

1

If you need any further advice, please call our Technical Helpline on :-

24

020 8758 0338 (Mon-Fri)

Image 25
Contents Roberts Contents Controls front view Dimmer button Alarm buttonControls rear Using the clock radio for the first time Selecting a station DAB Repeat this procedure for the remaining presets Presetting stations DAB and FMAbove procedure Number in which you wish to store the chosen stationRecalling a preset Finding new stations DAB Secondary services DAB Manual tuning DABCurrent station belongs Display modes DABPress the Tuning Up/Down button until the display shows DRC Dynamic Range Control DRC settings DABDefault is OrderFavourite stations Station order setup DABAlphanumeric Active stationPrune stations DAB Signal strength display DABOperating your radio Search tuning FM Manual tuning FM Display modes FM Stereo / Mono setting FM Auto preset stations FM Setting an alarm AlarmsAlarm minute will be highlighted Alarm source will be highlightedWeekends Then press the Select button to confi rm the settingDay options as described below To cancel the alarm To view set alarm times To switch the alarm on or offTo set the snooze time SnoozeAppear on the display Will show on the displaySleep function Setting the clock manually To return to auto clock set mode Software version Dual mode dimmer backlightSystem reset To the Auxiliary input socket Auxiliary input socketHeadphone socket General Headphone socket 5mm dia Specifications Circuit features174.928 239.200MHz 87.50 108 MHz Aux in socket 5mm diaPage Guarantee Technical Helpline 020 8758 0338 Mon-Fri during offi ce hours Worton Road Isleworth Middlesex